说明

• Dear friend, if you want to buy the airdrop system for DJI Mavic 2 Pro/Zoom and for FIMI X8 Mini, please click on the picture above Note: Not available for DJI Mavic 3 Classic Type A Feature: 1 Exquisite and compact, smooth to carry, copper publish and silicone material, it's going to no longer influence the use after bending, 2 Enhance the handheld remote control sign to effectively amplify the flight distance, three Plug and play, uncomplicated and quick installation and disassembly, non-destructive set up design, 4 Film protection,prevent from fingerprints,dust,scratches, 5 The floor is specular effect,very good reflecting effect,better signal boosting Description: Material: Silica gel + copper(Yagi antenna), ABS(mirror extended range) Applicable models: for Smart Controller/FIMI X8 Mini, Color: Black, Net weight: 21g (Yagi antenna), 26g (mirror extended range), 47g (dual prolonged range) Package weight: 37g (Yagi antenna), 38g (mirror extended range), 75g (double prolonged range) Product size: 7*2*2 (Yagi antenna), 6*6*2 (mirror extended range) Package size: 9*5*3 (Yagi antenna), 8*7*4cm (mirror prolonged range), 24*17cm (double prolonged range) Packing list: (Bundle 1) Yagi antenna x 2 (Bundle 2) Mirror extended booster x 2 (Bundle 3) Yagi antenna x 2 Mirror extended booster x 2 Note: 1 no longer consist of Drone and distant control, 2: 1cm=10mm=0, three allow 1-3mm error thanks to guide measurement please make sure you don't intellect earlier than ordering, four to the variation between various monitors, the picture might not reflect the actual colour of the item,please make sure you do not mind before ordering, Thank you! Type B Feature: 1 The acquire impact is obvious, has good directionality, and has a definite anti-interference ability, 2 Using ABS + copper, after anodizing treatment, enhance the texture, wear resistance and corrosion resistance, three The weight is set 23g, and the lightweight design makes it clean for purchasers to carry and store, 4 Installation and disassembly are clear-cut and quick, no need to alter the control, plug and play, non-destructive set up design, don't worry about damaging the handheld remote control Description: Material: ABS+copper Applicable models: for Mavic 2/Mini/Air 1/Spark/FIMI X8 SE2020/FIMI X8 Mini Color: Black or Gray Net weight: 23g Package weight: 38g Product size: 6*2*2 Package size: 9*5*3 Packing list: Yagi antenna sign booster * 2 Note: 1 not encompass the Mobile phone, distant control, drone, 2: 1cm=10mm=0, three enable 1-3mm error because of guide size please make sure you do not intellect earlier than ordering, 4 to the difference between diversified monitors, the picture might not mirror the actual color of the item,please make sure you don't mind earlier than ordering, Thank you! Type C Feature: 1 The card role is progressively designed without destructive the remote control antenna, 2 2 self sufficient antennas, to install, three Bayonet design,2 pieces can be buckled, to hold and store, four Film protection,prevent from fingerprints,dust,scratches, 5 The floor is specular effect,very good reflecting effect,better signal boosting Description: Material: Plastic Applicable models: for FIMI X8 Mini/DJI Mavic Mini Color: White Net weight: 24 Package weight: 42 Product size: 6*6*2 Package size: 6*7*3 Packing list: 1pcs Signal Booster Note: 1 not include Drone and Remote Control, 2: 1cm=10mm=0, three allow 1-3mm error thanks to handbook dimension please ensure you don't intellect earlier than ordering, four to the adaptation between varied monitors, the picture won't reflect the actual shade of the item,please make sure you do not mind before ordering, Thank you! Yagi Antenna Feature: 1 Exquisite and compact, clean to carry, copper publish and silicone material, it'll no longer impact the use after bending; 2 Enhance the handheld remote control sign to effectively increase the flight distance; three Plug and play, uncomplicated and short installation and disassembly, non-destructive set up design Note: 1 now not include Drone/remote management and mobile phone, 2: 1cm=10mm=0, three allow 1-3mm error due to guide measurement please make sure you do not intellect before ordering, four to the variation between diverse monitors, the image might not mirror the particular shade of the item,please ensure you don't mind before ordering, Thank you! Signal vary extender Feature: 1 Enhance the remote control signal and effectively enlarge the flight distance; 2 Bayonet design, two replicate range extenders could be buckled together for simple carrying and storage; 3 Film defense to forestall fingerprints, dust, scratches, and the movie would be torn aside for larger use; four The floor has nice reflect effect, good reflection effect and sign enhancement; five Two antennas, self sufficient installation, plug and play, simple and short installation and disassembly, non-destructive set up design Description: Material: Plastic, Applicable models: for FIMI X8SE 2020 Color: Black, Net weight: 25 (bundle 1), 46 (bundle 2) Package weight: 38g (bundle 1), eighty (bundle 2) Product size: 6*6*2 (mirror extended range), 6*1*2 (Yagi antenna) Package size: 8*7*3 (mirror extended range), 9*5*3 (Yagi antenna), 19*13cm (Package 2) Note: 1 now not include the Remote Control, 2: 1cm=10mm=0, three enable 1-3mm error thanks to guide dimension please make sure you don't mind before ordering, four to the adaptation between assorted monitors, the image might not mirror the actual colour of the item,please make sure you do not intellect earlier than ordering, Thank you!

• 
• 
• 
• 
• 

审核