Beschreibung

• Description 1. Leddiode(Through Hole DIP 2pins leads mini LEDs Set) 2. Compatible with: DIY PCB Board Circuit, Arduino, Raspberry Pi, Hobby, Science Experiments, Throwies Project, Breadboard, T1 T-1 Bulb, Bulk 3 3 Parts Replacement 3. Micro 5 mm Diameter, 2pin 2 pin Leads, Tiny Bright Light, Low Voltage Low Power Consumption Positive and Negative Electrode: (1)Positive and destructive pins: the lengthy pin is positive, the fast pin is negative. LED Welding Conditions: (1) Soldering iron welding: The tip temperature of the soldering iron (up to 30W) shall not exceed 280 ° C; The soldering iron should be grounded, and static electricity can't exceed the range; Welding time shall not exceed 3 seconds; The welding role ought to be not less than 3 millimeters away from the colloid. (2) Immersion welding: The maximum temperature for immersion welding is 260 ° C; The immersion welding time shall now not exceed three seconds; The immersion welding position needs to be a minimum of 3 millimet

• 
• 
• 

Rückmeldung