Beschreibung

• 1/5/10/20pcs Thermal Grease Paste Conductive Heatsink Plaster Viscous Adhesive Glue For Chip VGA RAM LED IC Cooler Radiator CoolDescription:1.It has excessive energy and immediate bonding effect, and is acceptable for immediately attaching varied components, LEDs and heat sinks. 2.Good thermal conductivity, solid adhesion, vacuum packaging isn't clean to oxidize and dry, nice viscosity, short drying time. 3.It has nice conductivity, broad operating temperature vary (-60~200°C), and short-term resistance to 300°C. 4.It has short floor curing time, long garage period, non-toxic, solvent-free, and can be safely utilized to elastic bonding, warmth dissipation, insulation and packaging of electronics, instruments, LEDs, warmth sinks, etc. 5.Instructions: 1) Extrusion of the product immediately during use, rubbing the outside of the adherend, and directly overlaying it after use, in case of trial again 2) The surface constant speed is related to the relative humidity and temperature within the air; the better the temperature, the quicker the curing speed, and vice versa. 3) Recommended thickness: 0.1-0.5mm, the thinner the better. 4) Please use solvent to wash the surface of the bonded object before use (such as alcohol), avoid cleaning with detergent, and practice it after the surface is clean. 6.The kit is sealing and the product is roofed with a vacuum bag to insulate the air and expand the garage time.Specifications:Thermal properties, solid glue adhesion. Specifications: 5g (single) Melting amount: zero (200°C/24 Hours) Evaporation: 0.001% (200°C/24 Hours) Thermal Conductivity: >0.671W/m-K Impedance: Ging Time: 3min (25°C) Track Strength: 25Kg Strength of Connected Buildings: 1.5map Margin Coefficient: >5.1 Scatter Coefficient: Package Included:1 x Heatsink Plaster

• 
• 
• 

Rückmeldung