Beschreibung

• Instruction: 1. Open the glue seal and unscrew the cap counterclockwise. The crimson dot at the cap will sink a little bit (do no longer pull the white disguise out) 2.Squeeze the bottle to apply glue evenly on the surface of the adherend (the dispensing needle can be installed to manage the quantity of glue) 3. Immediately practice the adhesive and press for 30 seconds or extra (if the temperature is low, please extend the site time). The perfect effect of the glue would be executed after 24 hours. 4. Tighten the lid clockwise and wipe the mouth with a paper after using. Precautions: 1. The bonding floor ought to be clear and freed from any contaminants resembling dirt, grease, grease, and rust. 2. When cutting off the product from the refrigerated environment, enable the adhesive to arrive room temperature earlier than use. 3. Keep faraway from teens and use it in a ventilated place. 4. Do now not wear gloves when handling. If you want to wear gloves, please desire rubber gloves. If the glue accidentally touches the skin, please do not wipe it with a paper towel. Please rinse directly with soapy water.     G-8600 Also can be utilized for gluing:  Metal. Plastic. Ceramics . Rubber . PVC . Leatherware . Wooden . Wires    

• 
• 
• 
• 
• 

Rückmeldung