Beschreibung

• 35W 468LED Swimming Pool Lamp RGBW Remote Control Pond Light AC12V IP68 Waterproof Landscape Underwater LightFeature:1. [Remote Control] With 12 key distant control, RGBW lighting effects, seven static colors, 3 dynamic effects, through the distant control, you could management a number of pool lights on the similar time, prefer any color you like, make your pool more colorful. 2. [AC12V Working Voltage] This pool light has AC12V operating voltage, which is secure and reliable, warding off the danger of electric shock, and may be used with confidence. (12V transformer is required for installation, not included) 3. [468LED And High Brightness] This pool delicate is easy to install, equipped with package and manuals, the within of the lamp physique is totally enclosed resin potting, utilizing 468 tremendous 2835 SMD lamp beads, uniform mild emission, low light decay, excessive brightness, a hundred and twenty diploma mild emission, extensive illumination range. 4. [Corrosion Resistant And Waterproof] Made of advantageous PC and stainless-steel material, which is corrosion resistant, IP68 waterproof, no longer petrified of water leakage, and has lengthy carrier life 5. [Widely Application] Widely used in courtyards, swimming pools, underwater decoration, landscapes, gardens, public fountains, etc. Specification:Item Type: Swimming Pool Lamp Shell Material: PC+ chrome steel Power: 35W Remote Control Battery: 23A 12V alkaline battery (Battery Not Included) Light Color: RGBW 2835 SMD Lamp Beads: 468LED Luminous Flux: 3500lm Waterproof Rating: IP68 Beam Angle: Astigmatism 120° Life: 50000h Product Diameter: Approx. 22cm / 8 Product Height: Approx. three / 1 Cable Length: Approx. 1 / 5 Weight: Approx. 1200g / 42 How to Use:1. Drill five holes (four screw holes and one twine hole) at the wall of the swimming pool. Use 4 lengthy screws and four expansion screw tubes to put in the solving bracket at the wall of the swimming pool. Pass the 180CM energy wire in the course of the twine gap on the wall to facilitate subsequent connection to the ability supply3. Remove the screws on the solving bracket, align the round holes at the product with the screw holes at the fixing bracket, and then use the removed screws to go during the small holes on the product floor to install the product and the fixing bracket collectively (The set up discipline around the fixed bracket ought to be flat, which ensures gapless fit between the lamp and the wall)4. Disconnect the complete current, ensure that the skin is put in in place, connect the ability cord to the AC12V transformer output line, and fasten the other end of the transformer to the output energy supply5. Install a 23A 12V alkaline battery within the handheld remote control (not included)6. Turn on the power, turn on the lights, and complete the installation7. Pull out the receiving antenna of the handheld remote control to administer the light switch, coloration and mode. Package List:1 x Light1 x Lamp Holder1 x Remote Control (Battery Not Included)1 x Remote Control Manual1 x Remote Control Cover1 x Lamp Manual4 x Long Screw4 x Screw Expansion Tube

• 
• 
• 
• 
• 

Rückmeldung