Beschreibung

• 60W 33Khz Ultrasound Piezoelectric Sensor Vegatble And Fruit Cleaner VibratorThe mechanism of ultrasonic cleaning is to make use of the physical effects such as cavitation, radiation stress and sound move in the cleansing liquid. It can exfoliate the kit produced by means of the dust at the cleaning parts, and may also sell the chemical reaction between the cleaning liquid and the dirt, with a aim to obtain the purpose of cleaning the object. The frequency of the ultrasonic cleaning mechanical device would be chosen via 10~500 kHz in step with the scale and purpose of the cleansing material, generally greater than 20~50 kHz. With the rise of the frequency of ultrasonic transducer, Langerhans oscillator, longitudinal oscillator and thickness oscillator would be used. In the miniaturization aspect, radial vibration and flexural vibration also are adopted. Ultrasonic cleansing has develop into extra and more extensively utilized in different industries, agriculture, household equipment, electronics, automobile, rubber, printing, aircraft, food, health center and scientific research. Ultrasonic vibrator installation process:1. Preparation tools: argon arc welding, hex wrench No. 10, ferrochrome wire, 2 square extreme temperature wire, 2*2 cable wire, vibrator glue, (stripping pliers, casing, cable ties, sand blasting machine, Pipe fittings, etc.), the welding screw: Calculate the situation of the vibrator, weld the screw within the cleaned position, after which clear the screw around, be sure you make it flat, in order not to influence the installation of the vibrator, the glue configuration: squeeze A glue round the screw, then squeeze the B glue around the A glue, then soon stir the AB glue with a small iron rod, simply so it's totally mixed evenly. Install the vibrating head: Slightly push the transducer to squeeze out the air and extra glue between the lowest and the lowest touch surface, in order that the vibrator is extra tightly incorporated with the chrome steel as a whole. Curing and solidification: It is cured at a relatively excessive room temperature, and may be connected in 4-8 hours. After 24 hours, it can be powered on: 1. Metal nailing mechanical device can also replace argon arc welding. 2, the welding screws ought to be entirely welded, otherwise it'll fall off easily, on the curing, the size of time must consider the temperature, the temperature is low for an extended time, the temperature is high, it's faster, it is suggested to function at room temperature, even if heated, do not overheat, right Transducer Applications: Used In Ultrasonic Immersible Transducer ultrasonic Cleaning mechanical device Ultrasonic Cleaner and Ultrasonic Pipe Cleaning,Ultrasonic Mixer etc.

• 
• 
• 

Rückmeldung