Beschreibung

• ANENG ST209 6000countsFull Intelligent Automatic Range Digital Current Multimeter(AUTO) Feature 1-1 Display: liquid crystal show (LCD); 1-2 Maximum display: 5999 (3 5/6) bit automated polarity display; 1-3 Measurement method: double integral A/D conversion; 1-4 Sampling rate: about three times in keeping with second; 1-5 Overrange display: The absolute best function shows"OL"; 1-6 Low voltage display:"Low voltage image "symbol appears; 1-7 Working environment:(0～40)°,relative humidity＜80%; 1-8: AAA 1 battery(not incluida); Function DC voltage DCV YES AC voltage ACV YES DC current DCA YES AC current ACA YES Resistor / Diode / On-Off Test / Capacitor YES Frequency F YES Square wave output YES NCV YES Zero line /Fire line check - Full unit symbol YES Backlight manual/Auto off YES True RMS size YES Temperature(°/°) YES Flashlight lighting YES Range Accuracy Resolution DC voltage 6V/60V/600V ± (0% + 10) 0/ 0/0 DC voltage 1000V ±(0%+3) 1V AC voltage 6V/60V/600V ± (0% +3) 0/ 0/0 AC voltage 750V ± (1% +10) 1V DC current 60A/600A ± (2% +30) 0/0 AC latest 60A/600A ± (2% +30) 0/0 Resistance (omh) 600 ± (0% + 5) 0 Resistance (omh) 6K/60K/600K/6M ± (0% + 3) 1/10/100/1k Resistance (omh) 40M ± (2% + 3) 10k Capacitance(C) 60nF/600nF/6uF/60uF/600uF ± (3% + 20) 10pF/100pF/1nF/10nF/100nF Capacitance(C) 6mF/30mF ± (5% + 3) 1uF/10uF Frequency 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz ± (0% + 3) 0/0/1Hz/10Hz/100Hz/1kHz/10kHz Temperature (-20-1000℃) As the directions 1℃ (0-1832℉) As the instructions 1℉ Package:1* instruction manual, 1* certificate, one leather-based cas 1* pair of examine leads, 1* temperature probe, NOTE: This series of instruments is designed in accordance with IEC1010 (Safety Standards promulgated by means of the International Electrotechnical Commission), please read the security precautions before use 1 When measuring voltage, please don't enter the limit voltage exceeding the wonderful cost of DC 1000V or AC 750V; 2 voltage below 2 is a secure voltage When measuring higher than 36V DC and 25V AC voltage, check whether the examine leads are in dependable contact, are related correctly, and are properly insulated to bypass electric shock; three When changing purposes and ranges, the test leads must go away the examine level

• 
• 
• 
• 
• 

Rückmeldung