Beschreibung

• DC12V 4-Wire Min Temperature Controller Speed Governor Fan Speed Motor Controller Digital Display Module Power Supply Feature : 1 The product is manufactured from tremendous materials, and the quality is assured 2 The product is designed with ultra-small size, mild and compact, with electronic reveal three Support four-wire fan velocity regulation, and the product is shipped with a probe cable four Support the low temperature shutdown of the fan inside 3A, can immediately turn off the fan energy supply, and assist the return series fan 5 Stable product performance and long carrier lifestyles Product parameters: Design strength supply voltage: DC12V Voltage range: DC8-16V (please eavesdrop on the fan voltage range for the circuit working voltage) Circuit self-consumption: less than 40mA (tested below 12V) Fan current: not more than three PWM range: 1-100 (signal share isn't always precise speed ±0%) PWM frequency: 25KHZ (plus or minus 1KHZ) PWM signal amplitude: 5V (no load) Temperature measurement range: -9°C Temperature measurement error: the mistake in the fluctuate of 0-50°C is lower than 1°C, and the error in other levels is lower than 2°C Precautions: 1 This management only controls the rate adjustment of the fan managed by way of the four-wire normal PWM sign The sign specification is 25KHZ 5V, which is supported through traditional chassis, CPU and lots of server four-wire fans, but it surely cannot management the speed adjustment of 2-3 cord fans! 2 The difference between the acceleration temperature and the complete velocity temperature should not be less than 5°C, and the variation between the shutdown temperature and the acceleration temperature shouldn't be less than 2°C If the value breaks the above temperature difference when enhancing the parameters, this system will routinely adjust the other two parameters Display instructions: Three-digit electronic tube: reveal specific parameters and values LED "×10 RPM": speed unit light This mild is on and the digital tube exhibits the fan velocity The value is the worth after the speed is split via 10 For example, if it displays 256, the actual fan velocity is 2560RPM (rev/min) LED "°C": temperature unit gentle This light is on and the digital tube reveals the temperature measured through the current probe LED "RUN": The fan operating indicator is on when the fan is running, and it is off when the fan is off Package list: Module X1 Sensor Cable X1

• 
• 
• 
• 
• 

Rückmeldung