Beschreibung

• Note: The payment is only Led Strip, Not Included Power Supply or Led Controller! WS2815 Must Use DC12V Power Supply AND Led Controller to Control! each 0 with solder joints, please note! Main feature: (1)One pixel broken will not impact the choice LEDs working. (2)The power protection,if +12V and GND contrary polarity,the LED should not burned. (3) Dual sign wires version, signal can bounce to transfer. (4)The customary digital instruments integrated,it doesn't cause digital welding within the set up process. Product parameters: * LED light source: WS2815 LEDs *same protocol as WS2813S with Dual-signal wires,so could be managed by way of technique of an identical WS2811/ws2812 controllers *Input voltage:DC12V; *Power:30leds/m----9watt/meter 60leds/m----18watt/meter 144leds/m----43/meter *LED resource:WS2815 led(5050 SMD RGB LED with integrated progressed version of ws2811 ic) *LED:each LED is separately controlled *IC Type:improved version ws2815 IC(built contained in the 5050 smd rgb led) *of IC:1 IC drives 1 led chip *Pixels:30/60/144/meter; *Pitch:16(1000/64); *Grey scale:256 *Bits/color:8-bits/color; *FPC Width:30leds/m----10mm 60leds/m----10mm 144leds/m----12mm *FPC color:White PCB,blackPCB *Protection rate:IP30/ IP65 /IP67 *Colors: Full shade RGB, dream coloration changing; *Cuttable:every LED is cuttable; *Package:in anti-static bag,IP30 IP65 with 3M adhensive *tape at the *back(IP67 with out 3M adhensive) *working temperature:-40 ~ 70 °C *Storage temperature:-50 ~ eighty °C *Source life:50,000 hours *Connector:4PIN connector terminal pair (Red: 12V power , green: Date line, Blue: standby date line,Black: GND)

• 
• 
• 
• 
• 

Rückmeldung