Beschreibung

• 【Product Details】❤️❤️❤️❤️❤️ Product Category: Electric Shaker Cup Cup Material: tritan Shell Material: ABS Lid Material: PP Capacity: 650ml Speed Speed: 7000rpm High Speed Battery Capacity: 1200mah Portable Handle/Direct Drinking Cup Lid/Exclusive Powder Box/ML & OZ Dual Scale/Type - c Charging Port/One-Button Switch Scope Of Application: Nutrition And Brewed Drinks That Need To Be Stirred Product With TYPE C Charging Port, USB Charging Cable, Worry-Free Charging Anytime, Anywhere Item Size: 92 * 200mm/333g It Is Recommended That The Water Temperature Exceeds 70°Do Not Shake When It Is Filled With Hot Water, Please Open The Lid And Stir To Prevent The Air Pressure In The Cup From Being Too Large And The Bullet Is Opened, And It Will Be Burned! 【How To Use】❤️❤️❤️❤️❤️ The cup does not paintings throughout charging Start: Press and maintain for 2 seconds to start The red light activates during charging and the white gentle turns on when solely charged Bright white light when working The white gentle flashes to indicate that there's no energy and needs to be charged before use The outdoors of the cup body can't be rinsed below the faucet, especially the rubber plug of the charging hole at the base and the switch button It is recommended to wipe the exterior of the cup with a humid material The inside the cup can be rinsed with water Note: 1 The base of the cup physique cannot be washed under the faucet, particularly the charging hole of the base ought to be tightly packed There should be no water on the switch button The cup won&;t work wisely after it&;s flooded Also: The cup doesn't work while charging 2 The blinking white light indicates that there isn't any strength and desires to be charged earlier than use 3 The red light is on when charging, and the white light is on when completely charged Make sure to unplug the charging cable and press and maintain to begin 4 After the powder cartridge is loaded with milk powder, the lid of the powder cartridge should be tightened on the powder cartridge, and the sound of "click" might be in position Only when the compact lid is tightened at the compact lid, it will no longer leave the compact lid contained in the lid after being put into the lid If the powder cartridge is removed from the cup, but the powder cartridge cap is left inside the lid, then the powder cartridge should be screwed on the powder cartridge cap, after tightening, and then stand back a little, you could take out the powder cartridge cap The reason behind the difficulty is that the employees put the powder cartridge in the lid without tightening the lid Special note: once you take out the powder cartridge yourself, and when loading the powder cartridge into the cup body, make sure you vertical, don't let the edge of the powder cartridge scratch the clear cup physique Carefully remove the cup from the field and place it within the field Do no longer scratch the exterior of the glass in both motion

• 
• 
• 
• 
• 

Rückmeldung