Beschreibung

• Attention: Different specifications of solar panels have diversified materials Please closely verify and decide the specifications you wish before purchasing！！ Feature: 【New upgrade】 It is provided with nanometer 4-in-1 nanometer lamp beads to meet the needs of brighter and wider discipline lighting This solar lamp uses white gentle and can illuminate a neighborhood of 30 square meters 【Adjustable brightness and time】Our photo voltaic outdoor lamp is managed by a distant controller It is dimmable Lighting time mode: (1) Automatic on/off, nightfall to dawn, all-night lighting; (2) 3/5/8 hours lighting fixtures time countdown You could make adjustments per the placement and climate 【Long working time】 The solar floodlight with remote control is equipped with wonderful solar panels to payment the integrated high-capacity lithium-ion battery, which may present 8-10 hours of continuing lighting fixtures after a full day of charging 【Waterproof and durable】 The outdoors waterproof grade of solar lamp is IP67, and it may be used normally in wet days This photo voltaic open air floodlight is made of metallic aluminum Package includes: 1 * 72LED/128LED/200LED photo voltaic lamp (optional) 1 * Remote management 4*Screw 2*Battery 1*Fixture Specification： 72LED Parameter: Protection class: IP67 Solar panel material: PVC Battery capacity: 1000mAh Battery: Lithium battery Charging time: 6-8 hours Working hours: 8-10 hours Timing function: 3/5/8 hours Number of Lamp Beads :72 Lamp size: 12cm * 13cm Solar panel size: 15cm*13cm Control method: remote control 128LED Parameter: Protection class: IP67 Solar panel material: PVC Battery capacity: 1200mAh Battery: Lithium battery Charging time: 6-8 hours Working hours: 8-10 hours Timing function: 3/5/8 hours Number of Lamp Beads :128 Lamp size: 15cm * 19cm Solar panel size: 22cm*13 Control method: remote control 200LED Parameter: Protection class: IP67 Solar panel material: Aluminum Battery capacity: 3600mAh Battery: Lithium battery Charging time: 6-8 hours Working hours: 8-10 hours Timing function: 3/5/8 hours Number of Lamp Beads :128 Lamp size: 18cm * 24cm Solar panel size: 18cm*27cm Control method: handheld remote control Notice： If the lamp can't illuminate after receiving the solar power product for the first time, please keep on with the following steps 1 Please switch on the product swap first 2 Place the solar panel in a spot with adequate sunlight and charge for greater than 8 hours 3 Keep the activate and position the light fixture in a dismal surroundings Note: To confirm the testing method, first join the power wire between the lamp body and the photovoltaic panel Place the photovoltaic panel in black - going through upwards and going through the sunlight You can see the crimson charging indicator light subsequent to the LED bead always flashing, indicating that the charging is traditional Place the photovoltaic panel facing down and going through far from the sunlight, and the LED beads will mechanically gentle up, indicating that the control is typical and can be installed normally The photo voltaic projection lamp has passed through price and discharge checking out and inspection in the factory earlier than leaving the factory, and is charged with a certain quantity of electricity It is suggested that customers use it the next day after putting in the lamp to ensure that the battery can cycle payment and discharge extra effectively Instructions for using solar projectors: 1 The solar assignment gentle is generally of split structure First, connect the power line male and female plugs of the sunshine body and the solar photovoltaic panel, tighten the waterproof rubber cap, examine whether or not it works normally, after which set up and connect it 2 Select the set up role and alter the set up angle (the set up attitude of the photo voltaic panel faces the south direction, and check out to install it in the position the place the solar shines for a protracted time) 3 After installation, examine whether the screws and fasteners of the lamp body are tightened, and whether or not the illumination attitude of the lamp physique and the daylight perspective of the photovoltaic panel are suitable 4 Place the transmitter of the remote control within the course of the lamp body, press the ON button of the remote control to turn at the lamp, and press the OFF button to turn off the lamp The installation distance of the handheld remote control is 3-10 meters Don't fear if you notice the sunshine becoming weak! Under totally charged conditions, the sunshine can primarily turn on for 8-10 hours Solar lighting function in a reduced power mode If the brightness begins to diminish after three or four hours of illumination, this is not a problem with the light, yet a normal working mode for solar lights Current reduction time: roughly 12 hours Time control function=100% output within the first three mins --- 10 minute preset brightness 90%/10 minute preset brightness 80% ---1 hour half-hour preset brightness 70%/1 hour preset brightness 60% ---1 hour preset brightness 50% ---2 hours preset brightness of 40% ---6 hours preset brightness 30% ---Afterwards, the brightness reduced to 20% until daybreak Corresponding complete power illumination time: about 5 hours Target application: events with enough battery energy Installation steps: 1 Select an acceptable location for punching 2 Insert the screw into the hole 3 Fix the body of the lamp correctly 4 Plug within the connection cable between the photo voltaic panel and the lamp

• 
• 
• 
• 
• 

Rückmeldung