Beschreibung

• STEP 1: Choose an accurate management Model DA: DC Control AC Input：DC3-32V Load：AC24-480V AA: AC Control AC Input：AC70-280V Load：AC24-480V STEP 2: Choose an accurate sort for current For Resistive load: Current of SSR =3 x operating recent of load Resistive load such as resistance furnace, incandescent lamp, oven, heating rod, electrical water heater For Inductive load: Current of SSR =6 x working recent of load Inductive load corresponding to motor, fan, transformer, pump, air conditioner and different loads with inductives For Capacitive load: Current of SSR =10 x operating current of load Capacitive load resembling compensating capactitors, batteries and other loads with capacitors STEP 3: Choose an acceptable warmth sink The temperature of heatsink at use should under 80℃ Apply heat-conductive silicon grease between SSR and heatsink Attentions!!!!!!!! 1: SSR can't be examined without load, and it ought to be added load of greater than 50W to test 2: Use fast fuse(70% Amp of rated SSR) to guard SSR from load quick circuit 3: Zero-cross Or Random turn-on The default is 0 pass SSR Random turn-on needs to be personalized STEP 1: Choose an accurate control Model DA: DC Control AC Input：DC3-32V Load：AC24-480V AA: AC Control AC Input：AC70-280V Load：AC24-480V STEP 2: Choose an accurate form for current For Resistive load: Current of SSR =3 x working recent of load Resistive load corresponding to resistance furnace, incandescent lamp, oven, heating rod, electric water heater For Inductive load: Current of SSR =6 x operating current of load Inductive load reminiscent of motor, fan, transformer, pump, air conditioner and different lots with inductives For Capacitive load: Current of SSR =10 x operating current of load Capacitive load akin to compensating capactitors, batteries and other loads with capacitors STEP 3: Choose an appropriate heat sink The temperature of heatsink at use should below 80℃ Apply heat-conductive silicon grease between SSR and heatsink Attentions!!!!!!!! 1: SSR can't be tested without load, and it needs to be added load of greater than 50W to test 2: Use instant fuse(70% Amp of rated SSR) to protect SSR from load quick circuit 3: Zero-cross Or Random turn-on The default is 0 cross SSR Random turn-on must be customized

• 
• 
• 
• 
•