Beschreibung

• MPPT/ PWM 80A/100A 12V 24V 36V 48V AUTO solar panel price controller Solar PV Battery Charger with LCD Display Note:It is nice like minded MPPT + PWM Solar Controllers ,not 100% Ture MPPT Product Description: Introducing our multi-functional solar controller with a large LCD exhibit and clock function It comes with 7 diversified operation modes, including charging mode, mild control mode, gentle control + time postpone management mode, general control mode, manual control mode, timing management mode, and examine mode (for factory use only) Features: Large LCD show with battery and solar panel working status, mode control, load output status, and parameter show 7 operation modes: charging mode, mild control mode, mild control + time delay control mode, overall control mode, manual control mode, timing control mode, and examine mode (factory use only) Automatic identification of 4 styles of voltages: DC12V/24V, DC36V, DC48V Automatic focusing MPPT monitoring charging for high efficiency Time and parameter atmosphere function Non-restrictive charging control function Discharge management operate varies with assorted control modes (refer to below) Low-voltage protection with a guide discharge quit operate Specifications: Current: 60A, 80A, 100A (optional) Input voltage: DC12V/24V, DC36V, DC48V Output voltage: DC12V/24V, DC36V, DC48V, DC5V/1*2USB Working temperature: -25℃ to 55℃ Item size: 198 * 180mm / 7 * 7 Package size: 195 * 184 * 66mm / 7 * 7 * 2 Modes of Discharge Control: Charging mode: no discharge under any situation Light control mode: opens discharge with a 10-minute delay when evening is detected; stops discharge with a 10-minute postpone when daylight hours is detected Light control + time delay control mode: begins discharge after a 10-minute postpone and begins counting down the timer; stops discharge when the timer reaches zero Maximum delay time is 23:59 General management mode: keeps the discharge state if no faults are detected Manual management mode: use "▼" button to turn on or give up discharge Timing control mode: activate or off discharge at steady intervals Test mode: equivalent to light management + time postpone control mode yet with less delay time (for manufacturing facility use only) Compatible with： 12V battery and 15-28V photo voltaic panel, 24V battery and 30-55V solar panel, 36V battery and 45-68V solar panel, 48V battery and 60-98V solar panel How to connect our conroller? 1 the battery to the controller It is suggested so as to add an air switch between the controller and the battery to guard the controller and the battery When the controller is attached to the battery, the LCD screen will show the parameters, and then set the battery variety 2 If you would like DC output to control the load, set the output management mode first, after which activate the DC output disconnect switch three Connect the solar panel PV to the controller, if the PV input voltage is at the controller’s Within the charging working range, the controller will enter the charging state four It is usually recommended that the controller upload an air swap to the battery, solar panel and load to play a protecting function Correct set up series A: (1)Battery --->(2)Solar panels ---> (3)DC load )

• 
• 
• 
• 
• 

Rückmeldung