Beschreibung

• < Note: The color of the thing may possibly differ slightly because of images and your own computer Features: 1 This swap is an isolated contact sensor switch, applicable to every kind of lamps on the medium(such as glass, acrylic, plastic , ceramic, etc) 2 High safety performance, long lifespan, exquisite and generous, is the first choice of making top grade merchandise 3 Can make sure customers safe, effectively forestall the interference of the outside global and the exterior global Specifications: Working voltage: AC170 to 240V 50 or 60Hz Load power:≤500W Main Machine Size: seventy five x 43 x 21mm or 2 x 1 x 0(L X W X H) Touch swap Size: approx 50 x 35 x 16mm or 1 x 1 x 0" Wires Connection: Red and black cord connects AC 220V output; the opposite black and blue line connect lamp Installation Procedure: Note: earlier than installation,please cut off the main power 1, to set a dash level on the mirror,the diameter of the contact level ought to be 9-10mm,first of all,should remove the quicksilver of replicate round the touch point,the size for the removable quicksilver ought to be 1; 2, to make a reticle in the center of the touch point,there are three arrow lines on cover of the switch,when install,the three arrow strains must aline any 3 lines of the reticle,it can contact to manage if after aline the direction,right now eradicate the paster of the touch board,and then can set up the touch activate the mirror,after which you could repair it using other stuff as a way to keep away from from shedding Package included: 1 x touch change Note: The colour of the thing may possibly vary barely thanks to pictures and your individual computer Features: 1 This change is an remoted contact sensor switch, applicable to all kinds of lamps at the medium(such as glass, acrylic, plastic , ceramic, etc) 2 High safety performance, long lifespan, exquisite and generous, is the 1st collection of making top grade merchandise three Can make certain clients safe, efficiently stop the interference of the exterior international and the exterior world Specifications: Working voltage: AC170 to 240V 50 or 60Hz Load power:≤500W Main Machine Size: seventy five x forty three x 21mm or 2 x 1 x 0(L X W X H) Touch change Size: approx 50 x 35 x 16mm or 1 x 1 x 0" Wires Connection: Red and black wire connects AC 220V output; the opposite black and blue line join lamp Installation Procedure: Note: before installation,please cut off the most important energy 1, to set a splash point at the mirror,the diameter of the touch level needs to be 9-10mm,first of all,should eliminate the quicksilver of mirror around the touch point,the size for the detachable quicksilver should be 1; 2, to make a reticle in the middle of the contact point,there are three arrow lines on conceal of the switch,when install,the 3 arrow traces must aline any 3 lines of the reticle,it can touch to control if after aline the direction,right now get rid of the paster of the contact board,and then can set up the touch turn on the mirror,after you could repair it using other stuff so as to keep away from from dropping Package included: 1 x touch swap

Rückmeldung