Beschreibung

• 3 Inch Touch Screen 480*320 LCD TFT Display Optional Case Fan for Raspberry Pi four or Raspberry Pi 3B+/3B Note: Raspberry Pi board isn't always included! Introduction We design the case for set up three inch contact screen you use the screen, please eliminate the canopy of case The cover can set up the cooling fan (the fan is not include), so when you don&;t use the display screen , you should use it with cooling fan We also design a holder with cooling fan, which permit you employ the display with cooling fan on the identical time You can choose the option accordin for your desire The contact display screen connect to Raspberry Pi by way of GPIO pin solely , please don&;t use the HDMI-compatible interface when you use the contact display screen ABS Case 1 use: 1) This case help to put in three inch touchscreen , and want to take away the canopy board and fan in this utilizing means ( Youcan notinstall the three inch display and fan on the same time ) 2) When you don&;t use the three inch touchscreen , it is a overall case with cooling fan 2 access for Raspberry Pi : We go away every gap for SD card , HDMI-compatible , AV , Ethernet , USB , POE , Camera , MIPI DSI ports three cooling fan : You can install the cooling fan at the cover board , which make the finest heat dissipation and extend the using life of Raspberry Pi four gap at the bottom: We make 2 gap at the bottom so that you can hange the case on the wall or something else This design is awfully convenient when using the 3 inch touchscreen five are Black / Transaperent color to chose for the case 6 to collect the screen and case 1) Install the Raspberry Pi on the base board 2) Insert the 3 inch contact display on Raspberry Pi by means of GPIO pin wisely ( don&;t be malposed ) 3) Install the canopy board About 3 inch Touch Screen 1 320×480 resolution 2 Resistive touch control 3 Compatible with Raspberry Pi A, B, A+, B+, 2B, 3B, 3B+,4B versions four Drivers supplied (works along with your own Raspbian/Ubuntu directly) 5 Size completely fits the Pi 6 High quality immersion gold surface plating 7 Supports Raspbian system, ubuntu components ,kali Linux method Note: Please don't use for other system, since it may not well suited How to apply Refer to this video : or You can obtain the system imgae which configured properly at the bottom of this hyperlink : Note Please plug the display on Raspberry Pi&;s GPIO pins properly ( as the picture) If you misplace it , the display screen will lose the contact operate all the time Make yes the right pin of display is aligned before powering up Use for Raspberry Pi 4 Use for Raspberry Pi 3B+/3B Use with Cooling Fan & Silicone Heatsink Module Metal Case for Raspberry Pi 4

• 
• 
• 
• 
•