Beschreibung

• Wenzhi Wieless RF433 Mhz receiver & wall panel transmitter Input Voltage : AC 90-250V Max Current : 10A Maximum load power: resistive power 2200W Induction power 500W Capacitive energy 200W Incandescent lamp 2200W LED gentle 300W Energy-saving lamp 300W The variety of lighting fixtures that can be managed on the identical time: less than 6 lights, and thelight strip is lower than 6 meters Operating Frequency: 433MHz Dimensions: 80mm*40mm Battery Model: CR2032 (Package Not integrated battery) Dimensions: 88mm x 90mm x 10mm Distance: 20-30 meters Notice: The kit Included assorted products since you favor a Different solutions NOTE 1) Do now not cord with energy on, turn off the ability to wire, and gear on after checking and confirming that it is appropriate 2) When the handheld remote control voltage is low, please replace the battery in time (when the handheld remote control battery voltage is low, the handheld remote control distance will commonly turn into shorter) 3) When using wireless electronic products, pay attention to warding off steel masks, large electronic devices,electromagnetic fields and other solid assets of interference, in order to keep away from the quick distance between the remote control and the receiver or the failure of standard operation 4) Do no longer use this electronic product abnormally Abnormal use will cut the performance and lifetime of the product In extreme cases, it's going to damage the product and convey hidden risks to your safety SET UP 1 Setting momentary Mode: Press the receiver&;s Learning button 1 time, the receiver&;s pink LED may be lights up, it comes into Setting state; Press the remote&;s button, the receiver&;s blue LED will flash then come off, Setting successfully 2 Setting Toggle Mode (Common operating mode): Press the receiver&;s Learning button 2 time, the receiver&;s red LED can be lights up, it comes into Setting state; Press the remote&;s button, the receiver&;s blue LED will flash then come off, Setting efficiently Momentary mode: Press the Remote management button, the receiver&;s relay is ON; release button, the receiver&;s relay is OFF Toggle mode: Press Remote management button for 1 time, the receiver&;s relay is ON; press button again, the receiver&;s relay is OFF Latched mode: Press Remote control button A, the receiver&;s relay is ON, Press the transmitter&;s button B, the receiver&;s relay is OFF Reset function: After push the receiver&;s learning button eight times, the receiver Clear all of the handheld remote control information in its memory the purple LED flashes for a few times, it signifies that the clean operate is finished (After cleared the code within the receiver, all the remote control cannot paintings with the receiver) Set strength on state： Press the educational button at the receiver 6 times, and the pink LED flashes thrice the ability on / off state efficiently

• 
• 
• 
• 
• 

Rückmeldung