Beschreibung

• Stationery Shop Nail 502 Instant Strong Adhesive Super Liquid Universal Shoe Repair Cyanoacrylate GlueFeatures:Use:Fast bonding of all kinds of metal, rubber, plastic, toys, wood, ceramics, jade, jewelry, handicrafts, sporting goods, electric appliances, decorations, etc.Usage:1. Open the plastic nozzle with a needle drill. Don't get near to your face when stepping into the nozzle, and don't over-pull or squeeze the tube.two.. First of all, eliminate oil, water, rust and paint from the joint surface, and the joint floor must be consistent.3. When in use, you simply deserve to squeeze a small amount of robust glue on one side of the seam surface, after which press the alternative side, which might be firmly bonded within 11 to 20 seconds. Glue does not have to be lightly dispersed, and don't squeeze out too much glue, too much glue will impact the bonding effect.4. After use, wipe off the excess glue on the peak of the verify tube with a dry cloth, after which shut the bottle cap.Points for attention:Watch out for glue dripping into your eyes and splashing entrance! Do no longer allow kids to touch, with a purpose to avoid danger! Pay attention to sticking to the skin and fingers! It is exactly forbidden to expose your self to the solar and sizzling places. Please store it within the shade! Do now not need to unfold the glue evenly, do not extrude an excessive amount of glue, the surplus will influence the bonding effectThe polymers within the glue rely on the pulling drive between each other to bind the two items tightly together. In the use of glue, an excessive amount of glue will make the polymers within the glue crowded with every single other.There isn't any nice stress between polymers. Polymers are so crowded with one another that they do not type the strongest attraction to each other. At an analogous time, the water between polymers isn't smooth to volatilize.This is why within the bonding process, "the thicker the film, the worse the felting effect of the glue." If you observe an excessive amount of glue, the glue will be filled.

• 
• 
• 
• 
• 

Rückmeldung