Beschreibung

• Thermal Paste Heat Conductive Glue Heatsink Plaster Viscous Adhesive Chip VGA RAM LED Cooler Radiator Cooling Extra Strong Glue1~10PCS Thermal Grease Paste Conductive Heatsink Plaster Viscous Adhesive Glue For Chip VGA RAM LED IC Cooler Radiator Cooling Description: 1.It has excessive strength and immediate bonding effect, and is suitable for directly attaching assorted components, LEDs and warmth sinks. 2.Good thermal conductivity, strong adhesion, vacuum packaging is not smooth to oxidize and , good viscosity, quick drying time. 3.It has nice conductivity, extensive operating temperature range (-60~200°C), and momentary resistance to 300°C. 4.It has short surface curing time, long garage period, non-toxic, solvent-free, and can be safely applied to elastic bonding, heat dissipation, insulation and packaging of electronics, instruments, LEDs, warmth sinks, etc. 5.Instructions: 1) Extrusion of the product straight during use, rubbing the skin of the adherend, and directly overlaying it after use, in case of trial again 2) The floor fixed speed is expounded to the relative humidity and temperature within the air; the better the temperature, the speedier the curing speed, and vice versa. 3) Recommended thickness: 0.1-0.5mm, the thinner the better. 4) Please use solvent to wash the surface of the bonded object earlier than use (such as alcohol), keep away from cleansing with detergent, and observe it after the skin is clean. 6.The equipment is sealing and the product is covered with a vacuum bag to insulate the air and expand the garage time. Specifications: Thermal properties, strong glue adhesion. Specifications: 5g (single) Melting amount: zero (200°C/24 Hours) Evaporation: 0.001% (200°C/24 Hours) Thermal Conductivity: >0.671W/m-K Impedance: <0.06 Ging Time: 3min (25°C) Track Strength: 25Kg Strength of Connected Buildings: 1.5map Margin Coefficient: >5.1 Scatter Coefficient: <0.005 Package Included: 1 x Heatsink Plaster

• 
• 

Rückmeldung