Description

• 1/5/10/20pcs Thermal Grease Paste Conductive Heatsink Plaster Viscous Adhesive Glue For Chip VGA RAM LED IC Cooler CaulkDescription:1.It has excessive energy and quick bonding effect, and is suitable for immediately attaching diverse components, LEDs and heat sinks. 2.Good thermal conductivity, stable adhesion, vacuum packaging is not clean to oxidize and dry, good viscosity, brief drying time. 3.It has good conductivity, vast working temperature range (-60~200°C), and momentary resistance to 300°C. 4.It has brief surface curing time, lengthy storage period, non-toxic, solvent-free, and might be safely utilized to elastic bonding, warmth dissipation, insulation and packaging of electronics, instruments, LEDs, warmth sinks, etc. 5.Instructions: 1) Extrusion of the product directly during use, rubbing the skin of the adherend, and immediately protecting it after use, in case of trial again 2) The surface fixed velocity is expounded to the relative humidity and temperature in the air; the higher the temperature, the faster the curing speed, and vice versa. 3) Recommended thickness: 0.1-0.5mm, the thinner the better. 4) Please use solvent to scrub the surface of the bonded object before use (such as alcohol), avoid cleansing with detergent, and follow it after the outside is clean. 6.The kit is sealing and the product is roofed with a vacuum bag to insulate the air and expand the storage time.Specifications:Thermal properties, solid glue adhesion. Specifications: 5g (single) Melting amount: zero (200°C/24 Hours) Evaporation: 0.001% (200°C/24 Hours) Thermal Conductivity: >0.671W/m-K Impedance: Ging Time: 3min (25°C) Track Strength: 25Kg Strength of Connected Buildings: 1.5map Margin Coefficient: >5.1 Scatter Coefficient: Package Included:1 x Heatsink Plaster

• 
• 
• 

Review