Description

• YIDI 5/10 pcs Pneumatic Air Hose Adaptor Quick Release Push in Connector Fitting PCF 4mm 6mm 8mm 12mm Pipe to Female Thread BSP R 1/8 1/4 3/8 1/2 02 Fittings Connectors Specification: Item No.: PCF Connection Way: One-Touch Quick Connection Type: Hose to Female Thread Design: Straight Adaptor Material: Nitrile Rubber, Plasticn , Metal Fluid Type: Clean Air, Vacuum, No Toxic Gas Applicable Hose: SolfNylon, Polyurethane Normal Operating Pressure: 0~10kgf/cm² (0~1.0MPa / 0~1.0bar) Max.Operating Pressure: 15.0 bar(1.5MPa) Negative Pressure:  -750mmhg (10Torr) Ambient And Fluid Temperature: 0~60℃ (140℉) Hose Size Options Type METRI M5*0.8 BSP (R) 1/8" BSP (R) 1/4" BSP (R) 3/8" BSP (R) 1/2" 4MM Hose O.D. √ √ √ √ × 6MM Hose O.D. √ √ √ √ √ 8MM Hose O.D. √ √ √ √ √ 10MM Hose O.D. × √ √ √ √ 12MM Hose O.D. × √ √ √ √ We have another web content within 14/16MM Hose O.D. Tpye for ordering. Installation Instructions: Installation Grasp the tubing and slowly push it into the right till it involves stop. The tubing could be locked by way of the spring gasket. Remove Push the release button to open the spring gasket so that the tubing would be released. Cautions: 1. Cleaning: Clean the piping earlier than connection to remove debris. 2. Tubing Cut: Ensure a perpendicular lower with out scratches at the tubing's outer diameter. 3. Pipe Length: Avoid excessive bending; select a proper pipe length. 4. Connection: After connecting, pull the tubing gently to examine its seal. 5. Release: Push frivolously at the release button flange for correct tubing withdrawal. 6. Removal: Avoid rotating the tubing entirely throughout removal. 7. Assembly: Ensure no debris enters when screwing pipes and fittings together. Safety Instructions: 1. Pressure: Ensure zero pressure within the tubing before removal. 2. Spatter Zones: Avoid common fittings in spatter-producing areas. 3. Monitor Conditions: Stay within specified strain and temperature ranges. 4. Environment: Avoid corrosive gases, chemicals, and extreme conditions. 5. Placement: Avoid areas with heavy vibrations or shocks. 6. Direction: Install tubing in the appropriate one-way direction. Dimension:

• 
• 
• 
• 
• 

Review