Description

• Note：The accelerator is marked as 48V, and the default also is 48V However, both 24V, 36V, 48V, and 60V 72V would be used, and the buyer needs to set the voltage themselves This is a throttle that can exhibit speed and mileage, compatible for most brushless controllers and has a wide range of functions The voltage is 24V 36V 48V 60V 72V Universal, which are set per the buyer&;s desires (First press and keep the M-key, then turn the major to start the machine, then long press and hold the M-key till the voltage parameter flashes, then brief press and preserve the M-key to modify the voltage till the desired voltage is reached, then long press and hold the M-key until P02 flashes, then close down and save the parameter settings) The throttle line 150cm, hole diameter 22mm 1 lock（also name elec door lock or electrical lock） 2（normal want pink to red,green to green，black to black connect with controller throttle ） three speed（can connect with controller hall wires or controller Instrument line） if throttle interface now not event your controller interface，need customer bring to an end interface to connect，thanks throttle LCD demonstrate can demonstrate real-time speed and mileage gap diameter is 22mm, and the manage is designed to prevent slipping, making it very sturdy Guidelines for surroundings LCD software parameters: Press and preserve the M key to show on the power and enter the parameter surroundings mode: "Short press the M key to quickly swap to the upper row of P characters, first showing P01 in descending order; * Long press the M key for greater than three seconds, the lower row of numbers will flash, after which quick press the M key to change the parameters, Hold for 5 seconds to save the present parameters Code: P01 would be set to 36V, 48V, 60V, 72V voltage, default is 48V P02 could be set from 10 to 200, with a default of 100 P03 would be set from 90 to 130, with a default of a hundred P04 can set the rate dimension mode, 0001 represents phase voltage pace test, and 0002 represents Hall velocity test P05 can set wheel diameters of 8,10,12,14,16,18,20,22,24,26,28,29, with a default of 14 inches P06 can set the variety of magnetic steels from 1 to 50, with a default of 30 P07 can set the battery voltage display coefficient to 95-105, with a default value of a hundred P08 can be set with 3 tools functions: P08=0 no gear, P08=1 defaults to first gear, P08=2 defaults to second gear, and P08=3 defaults to third equipment Default is zero P09 mileage reset: After coming into the parameters, lengthy press for three seconds, the mileage will flash, and short press 10 occasions P10 kilometers and miles switch, 0001 represents kilometers, 0002 represents miles

• 
• 
• 
• 
• 

Review