Description

• Power delivery mode: built-in battery (TP-C charging) Potência nominal: 20W Energy: 5W Shell Material: ABS Diâmeter layout: 96mm Função: vácuo Materials: ABS PCB Rated frequency: 10W Single use time: 1-60s (automatic stop) Standby time: 30 days Air pump capacity: 500CC Vacuum flow: three Inspiring MPa: -60kpa AR fireplace Motor: 370 ar Fire Brigade Motor voltage: 7 Ruído: <60db Pressão alívio método: válvula solenóide redefine automaticamente Display Mode: Battery share display/Timing demonstrate Battery: 1200mAH built-in battery Supply voltage: DC5V/1AType-C How to use Place the mason jar lid on top of the jar (not suitable for one-piece caps with rings) Press the sealer firmly, retaining it smooth Remove the tip mason jar sealer to double the impact by way of including a ring lid (ring conceal not integrated in our package) To get the traditional mouth seal bottle, simply insert the pink arrow into the standard mouth seal converter Align it with the unencumber image on the main unit and insert it inside the silicone ring in the large mouth seal field and squeeze it clockwise At this level the arrow is aligned with the symbol of the lock, which indicates a successful installation Aviso prévio When filling the gentle food or liquid, do not overload the bottle, less air in the bottle, the longer the sealer will paintings and the sealing effect could be quick Please examine if the bottle mouth is dry and clean If there may be water or particles in the mouth of the bottle, the mason jar sealer will not be able to seal The mason jar vacuum sealer did not press in place and did not allow the bottle mouth to go into the sealer permanently Mason jars don&;t match the lids Note that common use could cause the silicone ring inside the mason&;s bottle vacuum sealer to shift, resulting in seal failure, manually adjust to the unique position earlier than use Check if the electric vacuum gauge is centered and pressed firmly against the bottle cap, click the button to start the vacuum pump, and wait about 40 seconds or more, and the air would be evacuated to the seal Clicking at the button closes the sealer back

• 
• 
• 
• 
•