Description

• Feature:100% Original DJI Spare PartCompatible with DJI Mavic 3 and Mavic 3 CINEIn Stock Fast Ship Note : 1,Those&;re faraway from new drone , almost new 2, If you replace the gimbal components ,your drone might misplaced calibration , please ensure you can solve the calibration situation before order Thank you Package include: as your preferred Gimbal Camera : Removed from new drone , in fine condition Yaw Motor Cable:New Board , teste operating positive four in 1 PTZ Cable Test Tool : How to apply the check tool (Mavic three and Mavic 3 CINE ) :1,Camera to Core Board (1-50 on and 8,9,43,44 off)2,Zoom to Core Board (1-10 on and 41-50 on , the opposite off)3, Roll M to Core Board (12-20 on but 18 off , 32-40 on yet 35 off)4, ROll M to Yaw M (51-52 on)5 , Yaw M to Core Board (21-31 on yet 23 off)How to apply the examine software (Mavic three Classic ) :1,Camera to Core Board (1-50 on and 9,43,44,51,52 off)2, Roll M to Core Board (12-20 on but 18 off , 32-40 on but 34 , 35 off)3 , Yaw M to Core Board (22-30 on but 23 off)How to use the verify tool (Mavic 3 Pro / 3 Pro CINE ) :1,Camera to Core Board (1-50 on and 9,43,44 ,51,52 off)2,Zoom to Core Board (1-11 on and 40-50 on , the alternative off)3, Roll M to Core Board (12-21 on , 31-39 on )4, ROll M to Yaw M (51-52 on)5 , Yaw M to Core Board (23-30 on)How to use the check software (Mavic 3T ) :1,Camera to Core Board (1-50 on and 7,10,11,40,41,51,52 off)2,Zoom to Core Board (1-9 on (5 off ) and 42-50 on )3, Roll M to Core Board (12-20 on (18 off), 32-40 on (35 off) )4, ROll M to Yaw M (51-52 on)5 , Yaw M to Core Board (21-31 on , 23 off) How to apply the Gimbal Motor Test board : 1, Input 5V and greater than 1A , TYPE port 2, Yaw Button : Press on yaw button, yaw motor rotate and two lamps flashing is standard 3, Roll & Pitch Button : Press on Roll & Pitch , Roll & Pitch motors rotate and both roll and pitch lamps flashing is traditional 4, Set Button : Switch forward and reverse rotation Gimbal Yaw/ Roll/ Pitch Motor: All the motors include the black covers , removed from different drone , in good condition , tested before transport Used PTZ Cable : 100 percent examined before delivery : New PTZ Cable : 100 percent working properly PTZ Cable Test Tool : How to apply the verify instrument (Mavic 3 and Mavic 3 CINE ) :1,Camera to Core Board (1-50 on and 8,9,43,44 off)2,Zoom to Core Board (1-10 on and 41-50 on , the opposite off)3, Roll M to Core Board (12-20 on but 18 off , 32-40 on yet 35 off)4, ROll M to Yaw M (51-52 on)5 , Yaw M to Core Board (21-31 on but 23 off)How to apply the check instrument (Mavic three Classic ) :1,Camera to Core Board (1-50 on and 9,43,44,51,52 off)2, Roll M to Core Board (12-20 on yet 18 off , 32-40 on but 34 , 35 off)3 , Yaw M to Core Board (22-30 on but 23 off)How to use the test tool (Mavic three Pro / three Pro CINE ) :1,Camera to Core Board (1-50 on and 9,43,44 ,51,52 off)2,Zoom to Core Board (1-11 on and 40-50 on , the opposite off)3, Roll M to Core Board (12-21 on , 31-39 on )4, ROll M to Yaw M (51-52 on)5 , Yaw M to Core Board (23-30 on) Important :1, solely check connection and disconnection of cable2, Please use tweezer to remove the cable closely , violent disassembly may well break the port Thank you !

• 
• 
• 
• 
• 

Review