Description

• Description： The GM52 series motor through iPower Motors is the ultimate brushless gimbal motor for DSLR / Iconic Brand 5D MARKII, MARKIII Cameras This motor is designed for large-scale multi-rotor platforms trying to carry Red Epic & DSLR sized gear – 4KG/cm Torque The precept of the camera stabilization using brushless direct pressure motors, In fact, gimbal according to BLDC motors is terribly akin to steady gimbal in keeping with interest servo GM5208-12 Specification: Model: GM5208 Motor Out Diameter: Ф63±0 Motor Height: 22±0 Hollow Shaft(OD): Ф15-0/-0 mm Hollow Shaft(ID): Ф12+0/0 mm Wire Length: 610±3mm Cable AWG: Motor Weight: 195±0 Wire plug: 2 dupont connector No-load current: 20V No-load volts: 0±0 A No-load Rpm: 456~504 RPM Load current: 20V Load volts: 1A Load torque(g): 1800-2500 Motor inner resistance: 15Ω±5%（Resistance varies with temperature） High voltage test: DC500V 10mA @1sec Rotor housing runout: ≤0 Steering (axle extension): clockwise High-low temperature test: High temperature: Keep at 60℃ for a hundred hours, and the motor can paintings usually after 24 hours at room temperature Low temperature: Keep at -20℃ for one hundred hours, and the motor can paintings usually after 24 hours at room temperature Maximum power: ≤40W Working current: 3-5S Working temperature: -20~60℃;10~90%RH GM5208-24 Specification: Model: GM5208-24 Motor Out Diameter: Ф59±0 Motor Height: 31±0 Hollow Shaft(OD): Ф15-0/-0 mm Hollow Shaft(ID): Ф12+0/0 mm Wire Length: 610±3mm Cable AWG: Motor Weight: 204±0 Wire plug: 2 dupont connector No-load current: 20V No-load volts: 0±0 A No-load Rpm: 396~436 RPM Load current: 20V Load volts: 1A Load torque(g): 1800-2500 Motor inside resistance: 13Ω±5%（Resistance varies with temperature） High voltage test: DC500V 10mA @1sec Rotor housing runout: ≤0 Steering (axle extension): clockwise High-low temperature test: High temperature: Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature Low temperature: Keep at -20℃ for one hundred hours, and the motor can paintings normally after 24 hours at room temperature Maximum power: ≤40W Working current: 3-5S Working temperature: -20~60℃;10~90%RH Package included: GM5208 gimbal motor x 1pc

Review