Description

• Specification Material:Anti-flammable PC Voltage:AC 230V,50/60Hz Max. Current Load: 3A/16A Temperature Accuracy: ±1℃ Temperature Setting: 10-80℃ Item Size: 86 * 86 *mm/ 3 * three Power Consumption:＜1WTemperature Sensor:NTC User Operation1. Power on/off: Press key to show on/off the thermostat2. Press M key to change between guide and automatic modes. In automatic mode, press 🔼 key or 🔽 key to enter automated temporary mode, which solely runs for several minutes. Press🕐 key to enter the clock setting, and press 🔼🔽keys to adjust the cost of each parameter: WiFI mannequin will mechanically obtain the Internet time. 5. The youngster lock is off through default at the factory. If you wish use this function, you must enter the advanced option to allow the kid lock function. Long press button for five seconds to soon turn off it. Mode Description1. ＋floor heating guide mode2.🕐+ surface heating automatic mode Period Programming InstructionsIn the power-off state, long press key M+🕐 key, then press M key to change options, press 🔼 key or🔽 key to regulate the parameters, and press key to move out with saving. Advanced Option SettingsIn the power-off state, press M key and🔽 key simultaneously for five seconds to go into progressed choice setting M key to enter a higher option, press🔼key and🔽 key to adjust, and press key to move out progressed option. Packing List1*Thermostat1*Sensor probe(only electric floor heating encompass sensor cable)ScrewsManual Network ConnectionPress and hold 🔼🔽 button for 5 seconds, the WIFI icon will seem on the show of the thermostat, press 🔼 again, the icon will flash (slow flash), and the thermostat will enter the code matching state.

• 
• 
• 
• 
• 

Review