Description

• LUJINXUN 1"(50) Tri-clamp Brew Heater 304 Stainless Steel Ten 220V Electric Boilers for Heating With Clamp and Adpter 1pc Specifications: Product Name: Flange Disc Heating TubeTube Length: 200mm/215mm/260mm/320mm/360mmVoltage: 110V/220V/380VPower: 1/2/3/4/5 Diameter: 8mmThread Diameter: 32mmFlange Disc: 50 (1 Tri-clamp)Tube Material: 304 stainless steelThread Material: 304 stainless steelPackage Contents: 1pc heating element with black cover,clamp and adpter Pay attention: Power Allowance -10%~+5% 01/Introduction to Heating Tube:This heating tube is used as a heating element inside water tanks, boilers, and water towers for brewing and fermentation equipment. No topic what mannequin you choose, you'll update it with the suitable specifications. 02/How to measure the dimensions of heating tubes :① Voltage: 220V or 380V, Power: How many KW② Flange specifications: 51 flange=outer diameter 51mm, sixty four flange=outer diameter 64mm, 77 flange=outer diameter 77, 91 flange=outer diameter 91mm③ Tube length: The size can fluctuate slightly, as lengthy since it can be put in into the machine 03/Instructions: 1. Before installation, use a multimeter to test if the heating tube is powered on. If the dimension is correct, then proceed with installation. If the dimensions is not powered on, please contact customer service. 2. The heating area of the heating tube needs to be completely submerged underwater earlier than the power would be grew to become on, and dehydration and dry burning are strictly prohibited. (Dehydration and dry burning discuss with heating aspects that are partially or permanently exposed to the water surface and electrified within the air. As warmth cannot be transferred out through water, it is permanently absorbed through means of the metallic tube, which may trigger the steel tube body to reveal black and bulge, or maybe burn, break, or melt.) 3. If the heating kit is supplied with an automatic water filling device, the ball valve needs to be recalibrated after each replacement of the heating tube to ensure that the liquid level is way above the position of the heating tube earlier than it can be used. To expensive all,1. Heaters are business products, not vase. some can have flaws, reminiscent of weld, corresponding to stainless steel trace and polish trace,that&;s normal. Because the heating cord contained in the heater tube is manufactured from OCr25A15 which is Magnetic, it's normal that the detail would be adsorbed by way of technique of magnet. Under the condition of insulation, the overseas regular for the heater energy settle for allowance -10% to 5% you're care about these, please consider carefully before make order. We don't settle for dispute or detrimental feedback about these you in your attention. Application: The electrical heating tube can not fully be used as a heater for closed oil tanks, oil drums and hydraulic oil devices, but also as water tanks, boiler heaters, tank heaters, mould temperature mechanical device heaters, etc., and are widely used in the heating of tanks-tanks-equipment in electronics, plastics, chemical industry and environmental engineering NOTICEAll purposes from our shop are registered site: 17track/en, PAYMENTVISA,Mastercard,WESTERN UNION,Maestro,Bank Transfer,QIVI WALLET,WebMoney,Boletol,PayPal WARRANTY SERVICEDelivery Time:Ship out within 3-5working daysAll emails could be answered within 24 hours REFUND or RESENDIf goods now not acquired or damaged,please cooperate with us to take pictures when you get hold of it, then present us the evidence,we will refund or resend a brand new one to you,thanks FEEDBACKAny questions please be at liberty contact with us before you leaving a feedback,we will try the finest that can assist you to remedy it Immediately.

• 
• 
• 
• 
• 

Review