Description

• Can be used to switch for DSM & Humboldt Simplfier,This system is aware of that everybody must know! ! ! She has DI function Cabinet simulation function Microphone placement position Cabinet material adjustment Preamplifier function with three-stage equalization Audio input function Headphone output operate Dry and moist sign output function Dry and wet sign loop operate And so at the included bass audio workstation, With this equipment, the brothers are smoothly competent whether they enter the sound card recording or enter the sound stage to perform, or improve the tone and dynamics of our bass! ! ! ! Okay, let&;s not speak more nonsense Let&;s introduce the operate of this system and its characteristics First of all, the IUPUT of our device is divided into energetic pickup and passive pickup There is a shift under that may be switched Then the OUT output section is 6 and DI OUT wet signal output and DI PARALLEL dry signal output These two alerts are vital when recording The 6 output is the mixing ratio output (the mixing ratio this is the dry and wet signal) There is a shift beneath 6 to change via or enter our output To put it bluntly, it is a ByPASS Then the PREAMP/BLEND knob of the panel section is a management of the integration ratio of the dry signal and the enter sign it is turned on to the minimum, it is the dry signal, and when it's became on, it is the moist signal As for the preamplifier part, I won&;t say much, volume gain, intermediate frequency, low frequency, and high frequency Here, the 3 equalizers are elevated by 15DB and attenuated through 15DB There is a frequency band selection at the IF They are 400HZ 900HZ 1, but the IF knob cannot attain 0DB Then talk about the operate of the cabinet, microphone and materials The CABSIM BLEND knob at the panel is the combination ratio control of the cabinet section and the part that would not pass through the cupboard simulation When the knob is determined to the minimum, the signal would not pass through the cupboard simulation, but when it reaches the maximum, it passes throughout the cabinet simulation Then the cupboard components are 4x10 1x15 8x10 strategies CAB SIZE The materials of the knob cabinet is the tone from transparent to warm Then speaker COLOR is the microphone placement function The dial beneath this knob is to select the characteristics of the tone As for the loops are divided into dry sign and wet signal loops, PARALLEL FX is the dry sign loop, PREAMP is the wet signal loop In short, this device has a lot of usage and wishes brothers to analyze and innovate All kit in the studio is bare and hand-crafted Perfectionists don&;t order! ! ! ! !

• 
• 
• 
• 

Review