Description

• Luminous tape instructions for use: 1, earlier than using, please put the product on a fluorescent lamp or other mild irradiation for 20 - 30 minutes, after turning off the light,you can see the glowing impact Products must first absorb the light, put out the lamp,then will shine, if it's used for performance: we advise that the performers wear black clothes, with a black mild illuminate, make darkish effect first before utilizing the product, and please let the tape take up the light about 20-30 minutes, then immediately go to one the stage,the impact is best shade is evening luminous effectLuminescent Value:Initial lighting supply is 1000LX, Activating time is 15 minutes,Luminescent value at five seconds ≥ 4000 mcd/m2Luminescent cost at half-hour ≥ 15 mcd/m2Luminescent price at 60 minutes ≥ eight mcd/m2Luminescent value at 300 mins ≥ 1 mcd/m2Optical garage time:4 hours Service Life: Indoor about 8 years, open air about five yearsAvailable color: mild green,green,blueOther technical datas:1 Surface Film: PET type2 Thickness of film: 0, Thickness of Glue:0 04mmThickness of Release Paper: 0, total thickness of products: zero thickness is with allowance of 5% extra or less3 Weight of Release Paper: 160g/sqm with 5% extra or less4 Type of Adhesive: Pressure-Sensitive Type5 Strength of Adhesive: after sticking to the board for 24 hours, on the condition of 0, 5min, whole length: 10cm, the falling Length≤ 2cm6 Operation temperature: 10 c----30 c7 Working temperature: -20c --- 60c(after sticking to the board for a minimum of 7 days)8 Storage temperature: 0 c----30 c

• 
• 
• 
• 
• 

Review