Description

• Note: The physique would not have memory, it's best to insert a memory card MD21 JUST Support 8-32G,thank you! (This product belongs to card direct recording, non-mobile phone WIFI shooting) The body has a strong magnetic suction, (distribution vehicle bracket + sports belt) Accessories: back clip, base, DV bracket, lanyard, strap, thimble, data cable, manual Functions: video, camera, night imaginative and prescient infrared, wide-angle a hundred and forty degrees, movement detection, Resolution: 1920*1080P /1280*720P, 6 evening vision infrared lighting Recording time: about 70 mins Charging time: 2 hours Battery: 180MAH Function: magnetic, movement detection Night vision: yes NO WIFI Support 8-32G How to use: 1 Long press for 3 seconds to turn on, and the blue mild will continually be displayed after turning on 2 Press the flexibility button again, the blue mild flashes thrice after which is going out, and the recording begins efficiently Press the ability button again to pause the recording three Long press for five seconds to shut down four Take out the TF card 5 Use the cardboard reader to insert the TF into the pc 6 Turn on the laptop and examine the video of the cardboard reader 1 Power button; 2 M button-mode button; 3 Lanyard hole; 4 Indicator light; five TF card slot; 6 USB; 7 Reset button; eight Night imaginative and prescient light; nine Lens 1 Product parameters: Video format: AVI Video encoding: M-JPEG Video resolution: 1920*1080 1280*720 Video body rate: 30fps Camera resolution: 4032*3024 Picture format: JPG Battery capacity: about 170mah Recording time: about 60 mins Charging voltage: DC-5V 1A Storage support: 8GB-32GB Transmission speed: USB 2 Interface type: Mini 8PIN USB 2 Operation handbook (please carry out the ensuing operations after placing the card normally) Note: 1 When the battery power is low, the pink and blue lights flash for five seconds and then the mechanical device will close down instantly 2 There is no card when the machine is became on, and the crimson and blue lighting fixtures will flash for 5 seconds and then the machine will mechanically shut down 3 There is not any operating mode after booting, and it's going to automatically close down after 1 minute 1) Charging: This machine has a built-in rechargeable lithium battery When the power of the machine is low, please charge it You can charge it within the following ways: 1 Connect a 5V charger; 2 Connect the mobile strength supply; three Connect the computer USB port Note: The pink light flashes when charging, and the crimson light is on when it is entirely charged Press the power button for 2 seconds to show on, the blue light can be on after turning on, and it's in standby mode 2) 720P video recording: In standby mode, click on the flexibility button once, and the blue gentle flashes three times to go out to enter the recording During recording, there is no indicator mild prompt; during recording, click the ability button as soon as to prevent and save the recording, the blue light is on, and it returns to standby mode A video of five minutes, mechanically kept in segments, and helps loop coverage 3) 1080P video recording: In standby mode, click the mode button once, the pink and blue lighting are on for 1080P recording mode, and then click the power button once, the purple lighting flash 3 times, and the red and blue lighting are off on the similar time to go into the recording; throughout recording, click on the ability button once to prevent saving Recording, the red and blue lights are on on the similar time, and it returns to standby mode A video of 5 minutes, mechanically saved in segments, and supports loop coverage 4) Take pictures: In standby mode, click the mode button twice, the red gentle is on and the blue light is off In this mode, click on the ability button once, the crimson mild will flash once, and an image could be generated and kept To proceed taking pictures, click the flexibility button back 5) The infrared gentle is became on and off: Turn on: In any mode after booting, press the ability button for about 2 seconds to release, the pink light flashes 2 times, and the infrared night vision gentle is turned on Turn off: In any mode, press the flexibility button for about 2 seconds to release, the pink mild flashes 3 times, and the infrared evening imaginative and prescient operate is became off 6) Motion detection mode (720P -1080P): 720P motion detection: After booting, the blue gentle is usually on, lengthy press the mode button for 3 seconds and release it, the purple mild flashes three times, and the blue mild is on, that is, the movement detection recording mode is became on After a moving object is detected , The blue light is going out to enter the motion detection recording; after 5 minutes, the recording is automatically saved If there is not any transferring object, the blue gentle is on and the mechanical device is in the detection state; when there's a transferring object, the blue light is off, and the video is entered (Press any button once to go out the motion detection mode) 1080P movement detection: After booting into standby mode, click the mode button once, the red and blue lighting fixtures are on, the mechanical device is in 1080P video mode, long press the mode button for three seconds, the pink lighting flash three times, crimson and blue lighting at the identical time to go into movement detection Recording mode, after detecting the movement of the object, the red and blue lights could be off at the identical time to go into the motion detection recording After five minutes, the video is robotically kept If there isn't any transferring object, the purple and blue lighting fixtures are on, and the mechanical device is within the detection state; when there is a shifting object, the red and blue lighting fixtures are off, and the video is entered (Press any button as soon as to exit the motion detection mode) 7) Record whereas charging: Connect the charger or mobile strength supply to record whereas charging, otherwise you can manually give up recording and switch to any mode 8) Reset: The mechanical device crashes, the buttons are invalid, and cannot be used normally, you would click on the button in the reset hole to reset the mechanical device 9) Shut down: In any mode, press and keep the ability button for roughly 6 seconds, and all the pink and blue lighting will go out to shut down When no purposes are utilized in standby mode, it'll mechanically close down after 1 minute of standby 10) Time modification: After the mechanical device is grew to become on, it'll robotically create a TXT textual content dossier (TIMEREST) within the root directory of the TF card When it's grew to become off, use the data cable to connect with the pc After opening the TIMEREST dossier on the removable disk, edit the time and structure (year) you need Month, day, hour, minute and second) After 20180101192526 Y, save the file, and the machine can be burned into the machine normally after the boot time The machine does not show the time by way of default If you must demonstrate the time watermark, replace the N in the dossier to Y The reference structure is as follows: 1: 20180101192526 Y (with time watermark display) 2: 20180101192526 N (no time watermark display) Precautions: Use occasion: Please strictly abide by way of the applicable legal guidelines of the country where it is used, and don't use this product for any unlawful purpose

• 
• 
• 
• 
• 

Review