说明

• Features: PWM converts digital signals into analog sign (0 to 10V) digital signal would be 5V or 24V level 0-100% PWM signal analog sign can be 0-10V voltage be used for business control panel PLC or other signal interface switching module is easy to cord and handy to apply Specification: Condition: 100 percent fresh and advantageous Current: 12mA Power delivery enter voltage: 12-30V Size: Approx five x four / 1 x 1 Weight: 20g Quantity: 1pc Using method: PWM signal input frequency range: 1KHZ-3KHZPWM sign input level range:4 to 10V to level, jumper inserted at 5V This sort sign chiefly for traditional industrial control card (such as for board), for 5V the CPU interface to 24V to level, jumper inserted at 24V This variety sign chiefly for traditional PLC interface 0-10V analog voltage output explanation: When the sign input port isn't always connected, the output port provides 0V The first time once we energy in this module, we larger calibrate it: find a 50% obligation ratio signal, connect to DIN-, DIN+, the amplitude fits corresponding jumper When frequency is at 1kHz ~ 3kHz, use a multi-meter to check AO, GND The meter must be displaying around five We modify the potentiometer on the converter module to make multi-meter displays about five After here is done, we've calibrated and coupled pulse signal with this converter module The module has a definition of zero Output current 10mA If duty ratio is in contrary to voltage, we will select PWM output pin STEP LOW / ACTIVE for application Package Included: 1 x PWM Signal to Voltage Converter Note: After power-up, when there isn't any input signal, the output is 0V There is output only when there's enter

• 
• 
• 
• 
• 

审核