说明

• Parameters: 1 Rated power: 550W/750W/1100W/1500W/2200W 2 Rated voltage: AC 220V/110V 50-60Hz 3 Speed range (RPM): 200-7000 (550W); 200-6500 (750W); 200-6000 (1100W); 200-5000 (1500W); 200-4500 (2200W) 4 Rated torque (Nm): 1 (550W); 2 (750W); 3 (1100W); 5 (1500W) 5 Installation size: 69mm 6 Shaft diameter: 15mm 7 Out shaft length: 27+15mm 8 Mounting thread: M6 via gap nine Key slot: 5*5*20mm Features: 1 Support one-key forward and reverse rotation, support smooth birth (both delivery and stop ease) 2 The motor output shaft has 15mm thread, that are geared up with synchronous pulley and ER special chuck, which is broadly used in belt sander, polishing machine, small lathe, milling machine, and so forth three Pure copper motor, solid strength and effective heat dissipation 4 Strong anti-interference ability, low noise, with multiple protections reminiscent of overcurrent, overload and overvoltage Energy saving servo motor guide 1 Safety instructions: 1 This product calls for reliable body of workers to install and debug: 1 It is critical to guarantee dependable grounding of the system; 1 It is exactly prohibited to open the control box and motor conceal when powered on; 1 Please make sure you turn off the flexibility when appearing the following operations: a) When putting in and repairing machines; 2 Instructions for using the operation panel: 2 Purpose of each button: F : Enter parameter mixture key Combined with different keys to enter parameter setting mode, error recovery key D: Direction switching The leading operate is to change directions and make sure parameter settings + : Increase motor pace Adding keys to parameter and index values - : Reduce motor velocity Parameter and index cost decrease key 2 Adjustment formulation for technician mode parameters: a) Press and maintain the "F" key while pressing the "+" key, and the display will demonstrate as P-00; b) Press the "+" or "-" keys to adjust the parameter number; c) Press the "F" key to go into the parameters, and the display screen will demonstrate the parameter values; d) Press the "+" or "-" keys to regulate to the desired parameter value; e) Press the "D" key to avoid wasting the parameters and exit 2 Restore manufacturing facility settings: While protecting down the "F" key, press the "+" key once, and the display screen will exhibit as P-00 Then, hold down the "D" key for 3 seconds and release it three Technician mode parameter table: P-02 Motor direction 0: counterclockwise; 1: Clockwise P-04 Starting pace 200-800 rpm P-05 Acceleration speed 300-1350 P-07 Start change 0-1 0: Knob start 1: Key beginning P-08 Brake function 0-1 0: Brake off 1: Brake activated P-10 Automatic working in 0: Ordinary sewing; 1: Automatic operating in Turn off the ability and prevent Stop operating in P-12 Acceleration time 4-120 Acceleration time P-14 Maximum recent restrict 50-500 four Fault handling: Error code Er03: Motor Hall or part line error Poor plug contact; The motor isn't always put in properly; Hall is broken Er04: Locked rotor defense Motor overload; The 4 core wires related to the motor and digital management have deficient contact Er05: Hardware overcurrent defense Motor overload; The sign line has poor touch or is broken Er07: Serial conversation timeout error The connection cord between the visual display unit and the motherboard is poor or the motherboard is broken

• 
• 
• 
• 
• 

审核