说明

• Godox CT-16 16 Channels Wireless Radio Flash Trigger Transmitter + 2x Receiver Set for Iconic Brand Nikon Pentax Studio Flash Introduction:The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous set off studio flash of cameras It consists of a sign sender and a receiver trigger and works by means of means of the frequency modulation wireless remote control sign transmitter adopts the progressed circuit and components, and can transmit the coded FM wireless signal The circuit of the transmitter has the operate of standby and hibernation, thus it has low strength consumption; the products can paintings under the standby mode for more than one 12 months with only 1 battery; continuously trigger for thirty thousand times The set off latest is only 0, that will definitely trigger no damage to the flash contact of the camera The transmitter is applicable to the traditional or camera with hot shoe or PC controlling interface trigger adopts dry battery for strength supply, which is safe, energy-saving, and convenient The product adopts micro-computer for controlling the decoding, which has advanced anti-interference capability; sensitive response speed, the highest synchronous pace can reach 1/250sec the units of the product uniquely have the multi-frequency isolation method and the self coding matching operate via customers Users can freely tournament and use the sender and the receiver in line with the demands, that have sixteen isolated channels to fit for particular capturing environments Triggers set in different channels can be mixed to paintings or independently work yet do not intrude with each other in an efficient distance Universal hot shoe interface- 433MHz transmit frequency secures instant response and secure transmission- 16 channels, transmitting distance as much as 30m, no limits with directions or angles- Maximum synchronous speed up to 1/250 second- With studio flash interface, can wirelessly set off a number of varieties of studio flashes- Speedy frequency regulation, convenient for photographers to shoot- Energy-saving design with 12V 23A battery for transmitter and two AAA batteries (not included) for receiver- Comes with a PC sync wire for cameras without sizzling shoe connectionsNote: This trigger does not assist TTL function with:For Nikon SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24;For Iconic Brand 580EX II, 580EX, 550EX, 540EZ, 520EZ, 430EX/EXII, 430EZ, 420EX, 420EZ, 380EX;For Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT;For Olympus FL-50, FL36;For Sigma EF-500 DG Super, EF-500 DG ST, EF-430;For Sunpak Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AFm 344D, 333D;For Vivitar 285HV (Older Vivitar 285/283 works solely with PC sync);Other flash models with a trigger voltage of 12V or lower;Work with flash items using common scorching shoe like for Nikon, for Sigma, for Olympus, for Pentax (except for Iconic Brand as they use a unique sizzling shoe) Specification Model: CT-16Channel: 16 ChannelsTransmit Frequency: 433MHzTransmitter Power: 12V 23A lithium battery (Not included)Receiver Power: 2 x 1 AAA Battery (Not included)Outdoor operation distance: max 30m / 90feet (open area, no fraise)Indoor operation distance: max 25m / 75feetSynchronous speed: Max 1/250secTransmitter Dimension: 60x42x30mmReceiver Dimension: 90x50x32mmColor: BlackMaterial: Metal + PlasticOperationHow to use:Insert the transmitter&;s scorching shoe socket into your camera&;s sizzling shoe jack, plug the flash onto the receiver, and switch ON the receiver Make yes the channel selector of both transmitter and receiver at similar channel Press the Test button at the transmitter to check earlier than taking pictures your digital camera would not have sizzling shoe socket for connecting the transmitter you possibly can connect the transmitter to the camera by the PC Sync Cord provided (Only the old digital camera needed) can trigger both the flashgun and studio lighting fixtures with this flash trigger If you use the receiver on large studio strobe flashlight or AC slave flash, you possibly can just connect the receiver to the studio strobe flashlight with 3 or 6 jack plug PC Sync cord(not included): Iconic Brand 2000D, Iconic Brand Minolta scorching shoe,etc Package Listing CT-161 xCT-16 Transmitter1 x CT-16 Receiver1 x Sync Cable1 x Convert Adapter1 x User Manual Package Listing 1xT upload 2x R1 x CT-16 Transmitter2 x CT-16 Receiver2 x Sync Cable2 x Convert Adapter1 x User Manual Package Listing 1xT upload 3x R1 xCT-16 Transmitter3 x CT-16 Receiver3 x Sync Cable3 x Convert Adapter1 x User Manual Package Listing 1xT upload 4x R1 x CT-16 Transmitter4 x CT-16 Receiver4 x Sync Cable4 x Convert Adapter1 x User Manual Note: Don&;t include different products

• 
• 
• 
• 
• 

审核