Descriptions

• 1/3" CCD 800TVL Color Home Door Hole Eye camera Viewer Security mini CCTV Camera for 25-30mm Thickness Door with Power AdapterSony CCD camera catProduct Size:Lens diameter 32MMIntermediate skinny part 25MMThe complete size 30MM - 85MM adjustableAt the lowest of the thickest a part of the 36MMSimple installation instructions:Fancy chart, Accessories sequentially spin down, and then the former cat burglar doorways down, increase the appropriate space (big generous about 25MM) and the product penetration from the outside, and finally the alternative equipment would be fittedImage Sensor 0.33 Inch SONY CCD picture sensorHorizontal decision 800 TV Lines,No quantity of infrared gentle (without IR)Scanning frequency PAL: 15.625 kHz / 50 KHzScanning System 2: 1lnterlace, 2: 1 interlaceMinimum illumination 0.5 LuxInternal Synchronization Internal / DC12VSignal / noise ratio greater than 48dB Better thanAuto Auto Electronic Shutter 1/50 ~ 1 / 100,000 sec.Video Output 1 Vp-p, 75 composite signalPower delivery 12V DC ( 10%)1.7mm lens configurationPower Consumption 800mA / DC12VStandard accessories:1. Camera (wide angle 170 degrees)2. 1pcs 12v1A Power AdapterTrouble and Solution:1. No Picture after offering powerMay be the power supply voltage abnormity, please examine the ability delivery voltage and pole whether or not exactitude.Please verify all the conecting cable and screens whether or not be linked correctly or not.2. The picture level course have flowing interference ripplesMay be attributable to the flexibility supply AC ripples, it need filter the wave of the ability supply.Check the video display and peripheral equipments used.3. The picture background coloration modifications continuouslyThe fluorescent lamp\\\\\\\'s electromagnetic discipline trigger colour roll. This is proper phenomenon of the cameras.Reduce the fluorescent lamp numbers or broaden the gap between the camera and the fluorescent lamps canimprove it.Use Power delivery exterior sync. Camera can remedy it.4.The photo smear too massThe strength supply\\\\\\\'s voltage unstableConnecting cables no longer join wisely or have high impedance.Trouble and Solution:PS: PAL structure is for Euro Courty, NTSCformat is for USA, Canada,if you don\\\\\\\'t know which one you need, please be at liberty to contact us.1. No Picture after providing powerMay be the flexibility supply voltage abnormity, please check the ability supply voltage and pole whether or not exactitude.Please test all of the conecting cable and displays whether be linked wisely or not.2. The photograph point path have flowing interference ripplesMay be attributable to the power delivery AC ripples, it need filter the wave of the flexibility supply.Check the display screen and peripheral equipments used.3. The photograph background shade changes continuouslyThe fluorescent lamp\\\\\\\'s electromagnetic field trigger color roll. This is right phenomenon of the cameras.Reduce the fluorescent lamp numbers or develop the distance between the digital camera and the fluorescent lamps canimprove it.Use Power delivery external sync. Camera can clear up it.4.The picture smear too massThe energy supply\\\\\\\'s voltage unstableConnecting cables no longer connect correctly or have excessive impedance.

• 
• 
• 
• 
• 

Révision