Descriptions

• Function Introduction: (1) High-definition LED display: time (12/24-hour formulation conversion), date, temperature Can task the current time on the same time (2) Alarm clock & snooze: a group of alarm clock, press SNZ/LIGHT to enter snooze (3) Temperature dimension range: -10~50℃ or (14-122℉) (4) Brightness Adjustment Function: three stages of brightness would be adjusted (5) Night mode (18:00-6:00), LED mild will mechanically dim at evening (6) Can be powered by means of 3 AAA batteries (shipped without batteries) or plugged into USB strength supply (DC 5V-1A), the alarm clock turns off the screen after 30 seconds when only using battery power Product list: 1*clock, 1* USB strength cable,1* guide Instructions for use and operation 1 operation (1) In any surroundings state, no key operation inside 15 seconds, return to time mode (2) During setting, the atmosphere merchandise blinks (3) Short press + or - key, surroundings merchandise "plus 1" or "minus 1", long press + or a, surroundings merchandise accelerate broaden or decrease (4) Driven by way of AAA battery, press any key, the demonstrate will illuminate with 30 seconds delay (5) In time state, press + key to switch LED brightness (three steps) (6) In any state, press SNZ/LIGHT key, the projection reveals the current time (or flip off the projection), press SNZ/LIGHT key when the alarm clock is ringing to go into the snooze state (7) When the projected time should be turned around a hundred and eighty degrees, press SWAP to rotate or not rotate the projected demonstrate (8) Long press SNZ/LIGHT key in any state to turn off the screen display, then press any key to redisplay the screen Anti evening disturbance sleep 2 (1) The default reveal is January 1, 2023, and the 12 months fluctuate is 2000-2099 (2) When the alarm clock is ringing, the ringing duration of one minute is: BIBIBIBI ringing, no key operation inside this minute will stop (end) ringing And press SNZ/LIGHT to pause the alarm, delivery the snooze function, the AL logo will flash, wait till the set snooze time period will proceed to alarm Continue the above cycle of alarm job Press other buttons MODE, ALARM, UP and DOWN to prevent (end) the alarm The default snooze time is five mins Only when the AL symbol is displayed, it ability the alarm is on And when the AL flag is not displayed, the alarm clock operate is turned off (3) The temperature is measured and detected each 10 seconds, when the temperature is lower than -10℃, it shows -10℃, and better than 50℃, it displays 50℃ Tips:the alarm clock turns off the display screen after 30 seconds when only using battery power you want the clock continuously hold on,you need connet the ability delivery this clock delivery without batteries

• 
• 
• 
• 
• 

Révision