Descriptions

• Operation and upkeep method: The quicksand falls too slowly: just pump out some air 1 Each quicksand portray can use an air regulator (syringe) to regulate the air and water within the quicksand portray 2 The air regulator (syringe) would be inserted around the square quicksand painting, and the circular quicksand portray may have a gap for adjustment! three Specific operation: collect the bubbles together (circular quicksand painting needs to focus the bubbles on the hole) (need to make sure the sand strikes away), and then use the air regulator (syringe) to insert the air gap to extract the air! The quicksand falls too fast: simply add some air 1 As with the above method, gather the bubbles together (circular quicksand portray must concentrate the bubbles on the hole) (need to ensure the sand moves away), and then use the air regulator (syringe) to insert the air gap to inject air! If many small bubbles in the quicksand painting change into a very broad bubble, there are two solutions: 1 Shake the quicksand portray to shake the massive bubbles into small bubbles 2 You can add just a little water to refill the evaporation of water Precautions for filling the quicksand painting with water 1 Be certain to use pure water or boiled water to cool it 2 As within the above method, extract some air and empty the air regulator tube (syringe tube) three Use the air regulator (syringe) to draw in a suitable amount of water to forestall immoderate strain and glass breakage (Too much air will trigger excessive stress contained in the quicksand painting, that may cause the glass to break, remember! )

• 
• 
• 
• 
• 

Révision