Descriptions

• Note: The size is simply for reference, there perhaps exist a dimension error, please examine intently earlier than you buy it Color may possibly fluctuate barely thanks to varied calibration of each monitor Motor use precautions: 1, before use, confirm the motor voltage is correct, if it's a DC motor, but also confirm whether the ability delivery recent is adequate 2, can't be overloaded, the overload purpose is principally divided into two parts, torque and shaft force, load torque can't exceed the rated torque of the motor, the shaft drive cannot exceed the axial and radial drive of the shaft, and the actual recent of the motor cannot exceed the rated recent after the load, the general motor needs to be equipped with a fuse to avoid overload burning the motor 3, don't store or function in a hot temperature or humid environment, do not place corrosive gas, will lower the motor impact four When assembling transmission elements resembling gears and belts at the motor shaft, do not beat abnormally when pressing 5, the positive and detrimental motor terminals of the ability supply to solder, soldering iron temperature 340 ° C to forty ° C, heating time inside 3 seconds can't make plastic deformation, within the work, let the solder level into the motor or spoil the tip of the wire, which will make the motor operate decline 6, when putting in the motor, listen in on whether the screw is just too long, and prevent too lengthy screws from touching the parts inside the motor

• 
• 
• 
• 
• 

Révision