Descriptions

• DC6-24V 1000W BLDC 3 Phase DC Brushless Motor Driver Hallless DC Motor Drive Board Speed Controller Regulator Working voltage: 6-20V (limit 24V) Drive current: rated 30A plus air cooling 50A Maximum power: 1000W Overcurrent protection: Yes Locked-rotor protection: Yes (after locked-rotor, the present will mechanically drop and run at intervals) Over-temperature protection: Yes (over-temperature power is halved) Maximum speed: 224000 RPM (2 pole motor), 74000 RPM (6 pole motor), 40000 RPM (12 pole motor), 35000 RPM (14 pole motor) Precautions: 1 Reverse connection of the superb and damaging poles of the power delivery at the motherboard will cause everlasting damage to some of the chips on the board (large recent will not work for a couple of seconds) 2 There is sampling over-current defense at the output of the motor during standard operation Because the power and recent of the module are very large, please do not artificially short-circuit the module when the module isn't always working normally Once the short-circuit, the circuit may be burnt and the tube may well burst, the 1st wiring verify Please examine with low recent and low voltage After ok, connect with excessive recent and excessive voltage Since it's a bare board module, please pay attention to the insulation of the wiring head It is exactly forbidden to touch the board elements three Do not join the motor that is needless to say inconsistent with the force module voltage, current, or power, to avoid inexplicable harm Model Number: Motor Driver Board color:As shown Material:Plastic + Metal Package Contents: 1 x DC 6-24V 1000W BLDC 3-Phase Brushless Motor Driver Only the above package content, other merchandise are not incorporated Note: Light capturing and assorted exhibits could cause the colour of the article within the photo a little bit assorted from the real thing The measurement allowed error is +/- 1-3cm

• 
• 
• 
• 
• 

Révision