Descriptions

• If the buttons cannot be managed when receiving the goods, charging and reusing them may end up in inadequate strength supply, that might not be capable to drive Remember to use a 5V/1A, low-power charging head for charging, and cannot use a quick charging high-power charging head It could cause the battery to not price wisely and seriously damage the battery Note: 1 2 handheld remote control distance about 120 meters 2 The throwing system can carry a weight of up to 750g Drone Airdrop Thrower System 2 Remote Control General Payload Delivery Thrower Air Dropper Device Camera Drones Accessories Specification: Weight: 750g Size: 55*54*26mm Usage Time: About 12 Hours Built-in Battery: 3 350mAh Charging Interface: Micro USB Charging Time: About ninety Minutes Package included: 1 x Strap 1 x Instruction 1 x Flash Light 1 x Charging Line 1 x Suspension Wire 1 x Remote Controller OR 2 x Strap 2 x Instruction 2 x Flash Light 2 x Charging Line 2 x Suspension Wire 2 x Remote Controller Installation step: 1 Thread the bandage into the adjuster hole (adjustable bandage) 2 Fix it on the bottom of the drone (the straps must keep away from the sensors at the bottom of the drone) 3 Hang the suspension cord onto the latch of the thrower to load items (Load goods in step with the weight of the model) feature: 1 Suitable for DJI Mini 3,Mini three Pro drone, can be delivered remotely, used for throwing bait, throwing gifts, giving marriage ceremony rings, and many others 2 Mini smooth to throw, let you reveal more probabilities of creation, three 3 The thrower is charged through USB, soon released, and the handheld remote control (non-rechargeable) controls the transmission through the button, 4 The installation weight is set 40g, gentle and safe, and the fuselage design is integrated, which will no longer harm the drone, so that you can get appealing airdrop gifts, five The backside touchdown gear is efficiently increased via 21mm, and it's going to nonetheless take off and land beneath uneven ground, effectively keeping the safety of the fuselage Specification: Material: ABS Net weight: seventy eight Maximum load: 100g Charging time: 1 hours Charging interface: Type-C Built-in battery capacity: a hundred and fifty mAh Approximate standby time: 12 hours Remote control distance: 100 meters Product size: 9*6*3 (thrower), 3*5*1 (remote control) Package included: 1 x Thrower 1 x Remote management 1 x set Increase touchdown gear 1 x Remote management screwdriver Note: Note: 1 The drone was now not included 2 The throwing distant isn't always applicable to Mavic Mini 1/Mini 2/Spark Feature: 1 Drone realizes long-distance transmission of items 2 Used for airdrop materials, outside rescue, specific delivery, marriage ceremony plants delivery 3 The handheld remote control of the thrower is released with one button, and the ultra-small physique is strong four It can be fixed on the drone with out affecting the flight The straps can be put in to circumvent the bottom sensor five Use time: about 2 hours Operating frequency: 2 Remote management distance: about 500 meters Charging time of the thrower: about 30 minutes Remote control charging time: about 30 minutes Thrower battery specifications: three (built-in lithium battery) Remote management battery specification: 3 (built-in lithium battery) 6 Applicable models: for DJI ini 1 2 3/Mini 3 Pro/Mavic 2/Pro/Air 2/Air/FIMI X8SE, Phantom 3 4, X193 PRO, SG906 PRO, X7 PRO, SG901, SG907, E520S, S162, F11, GW90, GW198, GD91 PRO, M8, ZEN k1, b4 , LYZ L109, JJRC x11 x12 x3 x5 x9, Harbson ZINO, Weili X1S and different unmanned aerial cars that will load more than 100 grams, remote control vehicles and handheld remote control boats, etc Specification: Material: ABS Color: Black Net weight: 55g Product size:9*4*6 (thrower), 15*5*2cm (remote control) Package included: Strap x 1 Manual x 1 Thrower x 1 Hanging cord x 1 Charging cable x 1 Throwing remote x 1

• 
• 
• 
• 
• 

Révision