Descriptions

• set up and use 1. Before the cylinder is piping, the particles in the pipe ought to be eliminated to stop the debris from coming into the cylinder;2. The medium utilized in the cylinder should be filtered by a filter out detail above 40 μm earlier than it can be used;3. In a low temperature environment, anti-freezing measures must be taken to stop the moisture of the method clock from freezing;4. If the cylinder is eliminated and not used for a protracted time, listen in on the outside anti-rust, the inlet and exhaust ports ought to be equipped with filth blocking caps, and the piston rod and transferring elements ought to be covered with anti-rust oil.

• 
• 
• 
• 
• 

Révision