Descriptions

• ---------------------------------------------- Epoxy & Hardener Set Special for guide coating of carbon fiber & Kevlar and different bolstered fiber fabrics ---------------------------------------------- Product Specifications: Model: KF-CE201 Quantity: 2 pieces Epoxy resin X1 Hardener X1 Color: transparent Transportation: logistics distribution Storage temperature: 15℃-30℃ Period: 24 months from the date of manufacture ---------------------------------------------- Product functionality characteristics: This product is room temperature curing fully clear epoxy resin and entirely transparent epoxy curing agent, it is a low viscosity changed epoxy resin adhesive, specifically used for carbon fiber and Kevlar fiber cloth, easy to mix, clear-cut operation, stirring The put up foam disappears easily After curing, it has excessive transparency, high gloss, no bubbles and pits, and can entirely penetrate carbon fiber woven products Convenient and fast, high strength after curing ---------------------------------------------- Operation method: Mix strictly in step with the burden ratio marked on the bottle, or adjust the ratio per the actual problem Main agent: curing agent = A : B = 2 : 1, stir thoroughly and do it slowly to avoid bubbles, then it needs to stand for 2-5 mins before use to regulate the generation of bubbles, after which pour the colloid instantly on the carbon fiber at the material Spread lightly with a spatula Please finish utilizing the stirred product inside 20 mins at room temperature (25°C) ---------------------------------------------- Curing time reference: When used in a low temperature environment, the epoxy resin A and the operating surface can be wisely heated to regulate the appropriate curing pace Restricted by way of adjustments in ambient temperature, base floor temperature and precise enlargement ratio during construction,Construction paintings at and beneath freezing point is not commended ---------------------------------------------- caution ① The temperature is increased in summer, and the waiting time could be shortened after blending It&;s OK to let stand for roughly 2 minutes ② When the temperature is low in winter, the viscosity of the resin will increase Epoxy A could be wisely preheated to reduce viscosity and then combined ---------------------------------------------- Precautions: 1 Two groups of A and B ought to be weighed strictly in share Too much or too little component b will affect the curing performance; when blending ingredients a and b, they have to be stirred flippantly stirring will trigger a part of it to solidify and a few to not solidify 2 The curing velocity of resin glue is expounded to the volume and temperature The thicker the glue layer, the slower the curing, and the better the temperature, the quicker the curing Therefore, the more mixing, the shorter the operation time, the bigger the size, and the slower It isn't always beneficial to mix an excessive amount of glue at one time, and use it instantly after mixing The larger the temperature, the shorter the coating cycle; conversely, the longer the time three The response between the resin and the curing agent will generate heat The thicker the adhesive layer, the more heat can be generated, and the warmth will generate air bubbles Therefore, the glue should be used quickly, and each time it's brushed slightly thinner, it can be repeated many times to avoid the technology of air bubbles and pinholes After the resin infusion is completed, if there are air bubbles in the resin layer, puncture the air bubbles with a fantastic needle, and the air bubbles will rise mechanically During operation, please preserve the environment clean to prevent dirt from contaminating the product four During the curing means of epoxy resin, the curing agent will take in moisture When the air humidity is high, it will take in moisture after curing, and the surface will feel like a layer of oil Therefore, it's going to be saved dry during the curing process, and should not be cured in a moist surroundings After oil is produced, the surface would be allowed to dry after which sanded with sanding paper 5 When the temperature is low, the epoxy resin A will crystallize into a fog-like flocculation phenomenon, resembling the technology of granular slag or complete freezing Before use, the epoxy resin A would be slightly heated, and the particles will disperse after heating up After opening, it may be used usually with out affecting performance 6 When using, watch out to not touch the outside and eyes, infrequently allergies may occur when contacting the skin! Wash your arms off any excess glue or stickies with alcohol as soon as possible after work is completed In case of contact with skin and eyes, flush with clean water If it is serious, see a physician as soon as probable 7 Close the cap tightly after use, do not confuse the cap, if the cap is wrongly closed, the product will blend and change and fail 8 Keep out of reach of children, don't installed mouth! nine Before utilizing this product in vast quantities, please try it out in advance to avoid mistakes! If you have any questions, please contact the merchant customer service ----------------------------------------------

• 
• 
• 
• 
• 

Révision