Descriptions

• The Longlife Air drier works on the foundation of the silica gel material removing the moisture out of the air because it passes through the plastic container moist atmospheric conditions the gel will soak up moisture and could exchange color to purple if it has take in a lot moisture When this happens the silica gel must either be heated up and dried or changed The heating up could be completed within the oven, microwave oven or direct sunlight First get rid of the drier from the physique of the generator by pulling the two plastic connections out from the facet panel connections To eliminate the silica gel for drying unscrew the end cap, perforated plate and foam rubber insert Place the silica gel in to a tumbler or ceramic container and gently warmth up until the color adjustments back indicating removing of moisture DO NOT OVERHEAT OR COOK!! Warranty: 2 years Specification: Model: Lonlf-AD300 Output R: <20% RH 2/min gasoline flow for five hours Drying theory: Silica gel beads Length: 250 MM Diameter: 50MM Air inlet/out diameter: 8(Use 8mm tube) Applied 1-30grams ozone generator Feature: The air dryer is full of Silica gel beads that are extremely absorbent when cutting off moisture from the ambient air 1 Increase the efficiency of your ozone generator 2 Stop particles from entering your ozone generator through its filters three Change shade from blue to crimson when complete with moisture four Can be easily recharged by means of putting the complete unit into an oven or microwave Details Â

• 
• 
• 
• 
• 

Révision