Descriptions

• Please Note Mat size:Width:0 meters,Length:2 metersTo 24 meters,For Example 1 sq. meters Is zero meters*2 meters,10 sq. meters Is 0 meters*20 meters If your heating field is greater than 12 sq. meters,such as 20 sq. meters,please buy 2 pcs 10 square meters What surface heating product must I use? Foil Heating Mat For Use Under Carpet, Laminate And Floating Engineered Wood Floors Our Foil Heating Mat Is An Electric Mat For Floating Floors That Requires No Mortar The System Can Be Customized For Installation In Regularly Shaped Spaces The Foil Product Is Designed To Be Installed Between Underlay And The Finished Flooring Tested Carpet Pads Are Sufficient Underlay For Laminate And Wood Installations Product Details The Electric Foil Heating Mat Is zero Wide (Eg 10sqm Mat = 0 x 20m Linear Length) Designed For Use Under Laminate Flooring And Other Floating Floor Applications Our System Consists Of a 150w/m2 Cable Mat Which Can Be Rolled Out And Cut To Shape To Fit Any Room Within The Mat Is a Thin 1 Mm Heating Cable Which Is Pre-Woven Into a 500mm Wide Foil Mesh The Mat Should Be Laid Directly Under The Surface To Be Heated, Pressed Down Under The Wooden/Laminated Floor Largest Mat Size Is 12m2 When Ordering 13m2 Or Higher, You Will Receive 2 Mats To Meet You Required Size To Install, Join Mats Parrellel To Thermostat Example - 16m2 = 2 x 8m2 Technical Data: Sizes Available In 1/2/3/4/5/6/7/8/9/10/11/12 m² Width: zero m Output: 150W/m2 (-10% To +10%) Cable Diameter: 1-2 Mm Used For: Foil Heating Mat Is Ideal For All Area Such As Bedroom, Bathroom, Lounge, Kitchen, Dinning Room, Conservatories, Under Laminate And Under Wood Floors To Calculate The Required Area To Specify The Required Materials It Is Needed To Determine The Available Floor Area To Heat This Area Corresponds To The Total Area Of The Space Minus The Surface Occupied By Fixtures (Such As Kitchen Units, Toilet, Bathtub, Etc) The Area To Heat Is Equal To The Surface Where Circulation Is Possible Step 1: Measure Room Dimensions Work Out The Total Floor Area If The Overall Room Is Rectangle In Shape, For Instance Like In The Image 5m By 3, The Total Area Is 5 x three = 17m² Step 2: Disregard Any Area Taken Up By Furniture Work Out How Much Of The Floor Space Is Taken Up By Fixed Objects In The Example Shown The Wardrobe Occupies An Are Of 1 x 1 = 1² Step 3: Determine The Floor Area To Be Heated The Total Floor Area To Be Heated Will Be The Total Area Minus The Area Occupied By Fixtures: 17 – 1 = 15² Step 4: Select The Foil Heating Mat Size Due To The Fact That There Must Be a Minimum Distance Of 5cm Between The Foil Heating Mat And The Walls, And Also Because When After Cutting And Turning The Foil There Will Be Always a Small Separation, The Total Area Of The Mat Should Never Be Above 85% Of The Heated Area The Maximum Heating Mat Area Will Be 15 x 0 = 13² The Largest Foil Mat Available Is 12m² So There Is The Need To Combine 2 Systems A Possibility Would Be 7m² Plus 6m² The System Must Be Controlled Via Thermostat And We Recommend The Use Of Floor Insulation In Order To Improve Savings And System Performance Vinyl Or Carpet Flooring Cannot Be Installed Directly On Top Of The Foil Heating Mats When These Floor Coverings Are Used, The Dual Overlay System Should Be Installed To Calculate The Required Area Warning 1 Do Not Order Too Large Ordering 85% Of The Room Area Is Enough If You Have Ordered Too Large, Please Do Not Cut Off The Heating Wires Please Cut Off The Foil And Reduce The Spacing Between The Heating Wires This Will Effectively Reduce The Area Of The Heating Mats 2 Make Sure The Package Is Complete And Not Damaged Before Signing If It Is Damaged, Please Refuse To Sign And We Will Give You a Full Refund You Think The Damaged Packaging Will Not Affect The Product, Please Take a Photo And Ask The Courier To Issue a Damage Certificate Before Signing For It three Opening, Please Check Whether The Resistance Of The Product Is Consistent With The Label If It Is Inconsistent, Please Take a Photo And Tell Us We Will Refund You After Verification If You Don&;t Have Tools, Please Unfold It And Connect The Power, Check It After One Hour Later,If The Heating Wire Temperature Is Higher Than The Ground, It Is Good Not Please Tell Us Will Refund You After Verification four There Is a Problem After The Product Is Installed, It Must Be Damaged By The Installer Please Tell Us And We Can Replace The Product For You As Quickly As Possible At Cost Price

• 
• 
• 
• 
• 

Révision