Descriptions

• Model Coloring Pigment Metal Color Pen Painting Hand Safe three-D Printer Water-Based Bright DIY 5/milliliter Bottle 3055-3096 Good [precautions] 1 Please shake nicely earlier than use Mechanical shaking package can be utilized instead of this paintings 2 Hand coating can be used from no dilution, or diluted with purified consuming water, shake properly earlier than use, and decide the suitable dilution ratio in keeping with your feeling 3 Just wrong, cotton swab dipped in pure water to wipe, just dry, cotton swab dipped in clinical alcohol Tongsha chief paint You can use pen soap or scientific alcohol or our pen washing option to clear the hand brush four This model paint is specially used for hand painting It is tough to wash and discard the spray pen It isn't recommended to spray 5 This model paint is totally diversified from other brands in bottom layer technology, so it's not recommended to mix it 6 This mannequin paint is only a mannequin paint used for mannequin toys I suppose you think it may be used for different functions 7 The bottle caps on the images of the major picture and purchase recommendations are painted by ourselves You can choose from the photos, even if there is a sure shade difference 8 The total process of hand painting is to wash the oil and dust at the surface of the parts, dry them, and then make up the soil After 3 hours of creating up the soil, paint the surface After one hour, touch the surface one night, dry it in 3 days, and use the material fermentation field for forty degrees After one night, the paint surface reaches the upper limit of product strength According to the process, we can get the conventional water-based model paint strength, which isn't always indestructible [instructions for use] 1 Shake your palms like a bartender Please make sure that the parts were wiped clean of oil, grime and dry, and that the lowest floor of the soil has been filled with water (the soil would be stuffed more firmly, the paint would be hung more easily, and the bottom shade can be unified, so there are many advantages in a word) 2 Gently squeeze a little bit paint from our particular eye drops bottle and drop it onto the toner paper 3 Wash the hand painting pen in natural water, dry it at the paper towel, gently level the tip of the pen, blend the small circles of the paint at the color matching paper, and gently attempt to follow a couple of strokes on the shade matching paper (this hand portray can assist the use of wet plate) 4 If you feel that the strokes should not smooth enough and the paint feels sticky, you don&;t need to wash the pen Just like a dragonfly skimming water, dip the tip of the pen on the floor of the water and take somewhat of natural water, then mix it with the paint on the colour matching paper, after which try to follow about a strokes in the clean of the color matching paper Repeat the above steps, simply really feel soft strokes, paint does not stick, quit 5 Dip in a bit of diluted paint, calmly apply a brush on the blank space at the color matching paper to adjust the paint amount of the pen tip, and then use the pen stomach at the aspect of the pen tip to drag the pen horizontally from peak to bottom as a long way as possible, and thinly coat the whole part After the first drying, do it again In the second degree of this process, the parts could be adjusted in a single path to produce the effect of pass hand painting If you believe the impact after one time is already very good, you can not follow it for the second time 6 In the entire process, please be mild and weak, and take hand painting critically

• 
• 
• 

Révision