Descriptions

• Dear customer Thank you for visiting my store.In order to give you a better printing experience and more surprises, we have conducted extensive testing before its launch. Please don’t worry about the quality of our product. Material: First layer: special colorful and shiny PEY film(printing surface) Second layer: flexible spring steel plate Third layer:texture PEI coating(printing surface) Fourth layer: soft magnet rubber with 3M glue (platform sticker) Note:the first ,second and third layer are sticked together, they are not a saperate part. Support printing filament PEY SIDE:PLA/PLA+/PETG/TPU PEI SIDE:PLA/PLA+/PEEK/PETG/TPU/PC/ABS and any other filaments Product size: 220*220mm (8.66*8.66inch) 235*235mm (9.25*9.25inch) 241x253.8mm（9.49*9.99inch) 257x257mm（10.12*10.12inch) 310x310mm（12.2*12.2inch) The PEY film is so different with others film,it has a pattern of stars and small dots on it, which will shine brightly,and when you look it from different angles, different colors will be reflected,so beautiful.Believe me, when you get it , you must will be shock and love it. PET/PEO also have pattern leave on model, but PEY can make your model have colorful and shiny pattern directly. So far, We have printed nearly 60 times and haven't found any damage of the pattern inside the PEY film.Its reuse rate is very high. We tested again and again and found that PEY film has very good adhesive for filament,even better than smooth PEI PET or PEO.It even can stick well without heating the platform. No glue , easily print even for a newbie If the PEY surface is dirty, you only need to wipe it with a wet tissue, dry it with a dry tissue.And then it becomes new one just like you first get it,no need alcohol or other cleaning solvent. The spring steel sheet can be bent to remove the mold quickly, without the help of other tools. And the plate will return to flatness,no deformation. You can even remove the model without cooling down on PEY sided. After our extensive testing, we recommend PEY to print PLA / TPU /PETG.(temperature suggestion:50°C-70°C,≤ 90°C) PEI print PLA /PLA-CF/PETG/PC/ABS /TPU /Nylon etc. The spring steel sheet is come with two printing sides , you can print on PEY or PEI for many times,which makes you take full advantage of it. 1.Both PEY and PEI are of very good adhesion, especially for PLA,so it is easy to print the first layer even for a new user. 2.The soft magnetic base with 3M glue is of very strong magnetic attraction, so it can attract to to the steel plate sticky,which can prevent the plate moving and warping. 3.Spring steel sheet is made of stainless steel, no matter how bent it is, it can return to flatness The spring steel sheet is flat and flexible, you just need to tear off the 3M tape of magnetic base and paste it on platform, then put the printing sheet on the magnetic base,the printing sheet will automatically attracted to magnetic base, no glue ,no screw, just put and print. 1 pcs Spring steel sheet(with PEY PEI printing surface) with or without magnetic base 1.Before each time printing, please wipe the printing surface with wet tissue first,and don't touch the PEY printing surface.Print after the surface dries out. 2.If you touch the PEY surface or PEY pattern leaving on model, and found the pattern disappear,please wipe it with wet tissue or IPA ,dry with dried tissue,then pattern will appear again. 3.This sheet need to use together with magnetic base, if you don’t have this base, please buy with magnetic base, but some printer has magnetic platform already such as bambu lab,prusa mk3, then you don’t need to buy with it. 4.We provide professional after-sales service. Please kindly contact us(seller) directly cause our customer service will respond to you within 24 hours no matter what the question.

• 
• 
• 
• 
• 

Révision