Descriptions

• Features: Designed for 12V 4-wire PWM fan/pump DC-DC booster circuit. This PWM Speed controller assist 12v standard fan speed control, also help pc water cooling PWM pump head speed adjustment. This governor is advised to adjust the output strength inside 7-8 watts (12V 0) This governor enter port is USB Type-c feminine is standard PWM 4pin fan port Built-in DCDC enhance circuit(boost USB 5V to 12V) pwm signal generator (make it ready to alter speed) Fan pace adjustment range 0-100% Turn the knob clockwise to increase the rate Turn the knob counterclockwise to play down the speed Turn counterclockwise to close the output The application state of affairs of the governor design is principally powered by means of the charging head/rechargeable battery, the typical output ability is usually 5V/2A, larger specs are comparatively rare, and the parameters of 12v/0 fan virtually reach 5V/2A total energy supply, while taking under consideration the small size of the PWM governor so restricted cooling capacity. It is suggested that the output current be managed below 0 for brief time use and under zero for very long time use. Here skill the current at the most speed, the fan latest will differ proportionally in keeping with the speed. Specification: Input voltage: 5V Output voltage: 12V PWM frequency: about 25KHz Output current: rated 0/maximum zero Input port: USB TYPE-C feminine port Output: PWM 4Pin Speed range: PWM responsibility cycle 0-100% type: B-1 to 2 Adapter cable Material: PLA colour: Black Package Contents: 1 x PWM Governor 1 x energy shipping Cable 1 x 1 to 2 Adapter cable Only the above equipment content, different item will not be included. Note: Light reflection and varied exhibits may cause the color of the article within the picture considerably diverse from the real thing. The dimension allowed error is +/- 1-3cm.

• 
• 
• 
• 
• 

Révision