Descriptions

• 1 (Receiver):Name:KR2201DWorking voltage: AC85-240V 60HZ/50HZWorking frequency: 433MHZMax ourrent:10AWorking way:wireless controlCoding way: learning codeModulation: ASKWorking temperature: -10*C~+70"CSize: 40*80(mm)2 Wall Switch:Name:WP8601RF frequency : 433MHzSupport code : Learning codeBattery : CR2032 BatterySize: 85*85*15 (mm)Working way: wi-fi controlModulation: ASKWorking temperature: -10*C~+70"CAbout Working mode:Momentary: Press the distant button, the relay connects, launch the distant button, the relay disconnects: Press as soon as the remote button, the relay connects, press the distant button twice, the relay disconnects: Press the remote button A, the relay connects, press the remote button B, the relay disconnect the Code:(Momentary)Press the educational key at the receiver once time, it comes into temporary surroundings mode for a moment, the LED could also be off , it comes into studying state the distant button, LED indicator at the receiver board will flash then come off three seconds, the LED indicator could be on again, learning successfully the Code: (Toggle)Press the educational key on the receiver two times time, it comes into toggle atmosphere mode for a moment, the LED could be off , it comes into studying state the remote button, LED indicator on the receiver board will flash then come off 3 seconds, the LED indicator might be on again, studying successfully the Code:( Latching)Note: When you choose for latching mode, as a way to study extra distant control, you need to be taught two varied button, the 1st time learning is for ON, the second time studying for OFF example: Button A = ON, Button B = OFFPress the educational key at the receiver triple time, it comes into latching mode for a moment, the LED indicator on the receiver board will flash then come off the distant button A. LED flash for 5 times the remote button B. LED flash for 5 timesAfter 3 seconds, the LED indicator may be on again, learning efficiently = ON, B = OFF.

• 
• 
• 
• 
• 

Révision