Descriptions

• Twotrees TS2 80W Laser Engraver Machine 450x450mm Compressed Spot Technology LaserGRBL LightBurn Wifi Air Assit System Flame Features: 10W Laser Power - Advanced LD+FAC+C-lens technology enables the spot reach up to 0.08 mm, and get much cleaner, thinner, smoother, deeper cuts. Autofocus laser, no need of manual adjustment. cutting of 8mm Plywood, able to cut off 18mm acrylic plate (black) and plywood by several times. Upgraded dual compression spot coupling technology:Ultra-fine laser focus area is reduced to 0.069mm*0.157mm, high-density laser can easily cut 15mm thick wood, 10mm thick black acrylic; can directly engrave mirror stainless steel metal, ceramics, glass, and engraving &The cutting speed is 40% higher than the ordinary model, which can be comparable to the effect of the 150W CO₂laser engraving machine.The laser sintering temperature is up to 1200℃ Robust and easy-to-install structure design:Aluminum profile + Sheet metal parts structure design makes the machine more durable and improves the accuracy of engraving. The portable all-metal structure, 60% pre-assembly, can be installed in 30 minutes. Support Offline Engraving:TS2 Offline Engraving & APP Connection - High Speed ESP32-DOWD-V3 Smart Chip, 32-bit LX6 microprocessor, high speed dicing, support LaserGRBL and LightBurn software, makes it more convenient to use by supporting App connection as well. Compatible wtih windows, MacOS, iOS and Android system. Active Stop Function Prevents Accidental Light Output：The laser head would automatically turn off when the machine is tilted at an angle of more than 15° (tilted, flipped, or dropped) by a gyroscope. It will increase the safety of the machine. Wide Compatibility:The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc. Emergency Stop Button:In the event of an unexpected situation, stop the machine at any time to make the engraving safer ✅ 10W laser power & 0.08mm Engraving accuracy & 17.7" x 17.7" Working Area; ✅ Intelligent design to automatically focus laser spot; ✅ Support App, Windows & Mac control; ✅ It can engrave stainless steel and cut up to 15mm wood & 3mm acrylic board; ✅ Security alarm, one emergency stop; ✅ Comes with protective goggles. Please use it in a ventilated and safe environment. 80W Laser Power： Advanced LD+FAC+C-lens technology enables the spot reach up to 0.08 mm, and get much cleaner, thinner, smoother, deeper cuts. Autofocus laser, no need of manual adjustment. One off cutting of 8mm Plywood, able to cut off 18mm acrylic plate (black) and plywood by several times Ultra Fine 0.01mm Engraving Precision The 0.01mm engraving precision enables the machine to create amazing details and remarkable artworks One-off Cutting of 8mm Plywood With 10W Laser output, your TS2 will be able to cut through plywood and pinewood up to 8mm thick or engrave on any hard surface including stainless steel. Smart Auto Focus Design: The Z-axis rising height is set via a custom button in the software and the focus is automatically adjusted for laser engraving and cutting. Emergency Stop Button: In the event of an unexpected situation, stop the machine at any time to make the engraving safer Support Offline Engraving: TS2 Offline Engraving & APP Connection - High Speed ESP32-DOWD-V3 Smart Chip, 32-bit LX6 microprocessor, high speed dicing, support LaserGRBL and LightBurn software, makes it more convenient to use by supporting App connection as well. Compatible wtih windows, MacOS, iOS and Android system. Large Working Area:450*450mmFull Module Design 1.60% pre-assembled parts with modular design makes installation easier than ever before. 2.Wire harness safety management Double drag chain structure for X-axis and Y-axis,regulating and protecting the cables. 3.Silk-screened scale markings:for easy measurement and positioning of the Strong Module Expansion Capabilitie 1.Can be sculpted on curved surfaces,such as water cups,spheres,etc,to meet your various sculpying surfaces 2.Reserved screen serial port,odders more possibilities and expandability for DIY modification of the machine. About Our TWO TREES Store: We have CE ,FCC, Certifications , 100% Original Brand Products If you have any questions, please contact our 24-hour online customer service on aliexpress If you like our products and company, please stay ⭐⭐⭐⭐⭐ Comments, we will continue to provide consumers with perfect products and services

• 
• 

Révision