Opisy

• technical parameter · Electrical parameters: 1 CQC, VDE, UL, CUL? AC250V 50~60Hz 5A / 10A / 15A (resistive load) 2 UL AC 125V 50Hz 15A (resistive load) · Operating temperature range: 0~240℃ (optional) · Temperature accuracy: ±2 ±3 ±5 ±10℃ · Temperature distinction between response and action: 8~100℃ (optional) · Wiring mode: plug terminal 250 (flexible 0~90° optional); plug terminal 187 (flexible 0~90° optional, thickness 0, 0 optional) · Service life: ≥ one hundred thousand times · Electric strength: AC 50Hz 1800V for 1min, no flicker, no breakdown · Contact resistance: ≤50mΩ · Insulation resistance: ≥100MΩ · Contact form: 1 Normally closed type: the temperature rises, the contact is disconnected, the temperature drops, and the touch is hooked up 2 Normally open type: the temperature rises, the touch is connected, the temperature drops, the touch is disconnected · Shell protection grade: IP00 · Grounding method: Connect the grounded metallic components of the device during the steel casing of the thermostat · Installation method: instantly use the screw nut to augment it · Temperature operating range: -25℃∽+240℃+1℃∽2℃ Features · It has the traits of stable performance, high precision, small size, gentle weight, high reliability, lengthy life, and occasional interference with radio Precautions 1 When utilizing the contact temperature-sensing installation, the metal disguise needs to be close to the set up floor of the managed equipment To make sure the temperature-sensing effect, the temperature-sensing floor must be covered with thermal grease or different heat-conducting medium with same performance 2 Do now not crush, loosen or deform the top of the canopy throughout installation, so as to not impact performance 3 Do not allow liquid to penetrate into the temperature controller, do not cause cracks within the shell, and don't substitute the form of the external terminals at will four The product is utilized in a circuit with a current of no more than 5A, and the copper core cross-section is 0㎜2 twine connection; when used in a circuit with a current of not more than 10A, the copper core cross-section is 0㎜2 twine join 5 The product should be stored in a ventilated, clean, dry, and non-corrosive fuel warehouse with a relative humidity of less than 90% and an ambient temperature of 40°C

• 

Recenzja