Opisy

• Description: 1 The human body sensor adopts pyroelectric infrared technology, integrated human body infrared sensing module, mild effect sensing module and delay swap module It adopts business zone-level chip, which has huge load capability and strong anti-interference capability 2 When the man enters the sensing range, it can be routinely turned on When the man leaves, the time could be automatically became off The traditional lighting is became off, the unmanned user is wasted, the life of the lamp is extended, and the calories saving, comfort and environmental defense are integrated three It can robotically recognize day and night, and the ambient illumination of the starting paintings can be freely selected, so that it should paintings automatically at evening and close throughout the day Users can alter themselves; 4 The detection distance is adjustable and can be adjusted in step with where of use; 5 The light-on time is adjustable and can be adjusted by the consumer according to local situations Technical parameters: Color: black, white, gray Detection range: 180° Detection distance: up to 12m (25°C) Working voltage: DC12V, DC24V, AC110-250V Operating temperature: –10°C ~ +40°C Operating humidity: less than 93% RH Delay time: 5 seconds ~ 6 mins (adjustable) Ambient illumination: 2 ~ 2000LUX (adjustable) Installation height: 1 ~ 2 Material: ABS Dimensions: 60*45*160mm Installation method: open type, (opening 16mm) When installing, the knob is going through down Adjustment: 1) LUX It is to adjust day or evening paintings A: When adjusted to the solar position, the sensor works all day; B: When it's adjusted to the moon position, the sensor doesn't work during the day and mechanically enters the operating state at night 2) TIME Is to regulate the sensor postpone time (5 ± 2 sec ~ 6 ± 1 min) The postpone time refers to the time when the sensor leaves the sensing subject after the sensor senses the man and the sensor delays the time 3) SENS It is to adjust the sensitivity of the sensor Generally no adjustment is required If the inductive induction is just too strong and the light is often on, the sensitivity would be adjusted to the minimum function Wiring instructions: N-blue (zero line) L-brown (fire line) Output - crimson (sensor output line) Blue and brown input strength Blue and red linked to the load (lamp)

• 
• 
• 
• 
• 

Recenzja