Opisy

• Note ATOMSTACK S10 Pro ● When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles. ● Please do not touch the laser emitter with your hand, or it may burn your hand. ● Please avoid strong impact on the machine. ● Children under 14 are not allowed to use this product and children over 14 need adult supervision. ● The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser. Packing List 1 x Tool Kit 4 x Foot Pad Foam 1 x Film 3 x Acrylic Sheet 3 x Wood Chips 10 x Wire Tie 1 x Desiccant 1 x Brush 1 x Clean Cloth 1 x Card Reader 1 x TF Card 1 x Power Adapter 1 x Instruction 1 x Data Line 1 x Touch Screen Components 1 x High-Definition Multimedia Interface Cable 1 x Laser Module 1 x Cutting Pad 1 x X Axis Assembly 1 x Y Axis Left Profile 1 x Y Axis Right Profile 1 x Profile On The Base 1 x Under The Base Profile 3 x Foot Bracket Specification Model: ATOMSTACK S10 PRO Print Size: Recommend Print Size 410*400mm Carving Objects:Wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective Electroplating layer and paint surface layer metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, slate; Cutting Objects:Cardboard, non-woven fabric, wood board, acrylic, some thin plastic board, sponge; Laser power: 50W Laser output power: 10-11W Wave Length: 445 ± 5nm Engraving accuracy: 0.01mm Focusing method: fixed focus laser, no need to focus Laser protective cover: Protect the user's eyes and prevent pets from grabbing the laser spot. Operating software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system. Input Format: NC, BMP, JPG, PNG, DXF, etc. Data transmission method: USB connection. Input Voltage: AC100-240V, 50/60Hz Output Voltage: DC12V, 5A Package Size: 59.5*35*13cm/ 23*13.8*5.1in Eye protection design The panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light, you and the people around you can also watch laser engraving without wear goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles. Upgraded dual compression spot coupling technology ultra-fine laser focus area is reduced to 0.08*0.06mm, high-density laser can easily cut 20mm thick wood, 15mm thick acrylic; can directly engrave mirror stainless steel metal, ceramics, glass, and engraving & cutting speed is 40% higher than the ordinary model, which can be comparable to the effect of the 150W CO₂ laser engraving machine. Upgraded fixed-focus laser no need to adjust the focus before engraving;The focal spot area of the new laser is only 1/3 of the spot area of other ordinary lasers, new laser combine precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser Precise scale lines axis There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement. 410x400mm large area engraving interval can meet your various engraving needs. More function ①uses an integrated screw rod which makes the movement of the laser more precise and the coupling more durable. ②Support offline engraving; In the event of an unexpected situation, stop the machine at any time to make the engraving safer. ③The laser sintering temperature is up to 1200℃ Wide compatibility The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support for Win XP / Win 7 / Win 8 / XP / Win 10, and also support for MAC system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc ATOMSTACK R3 Roll Features: 1.No installation, no adjustment, ready to use after unpacking. 2.The diameter can be adjusted in 8 steps, and the engraving diameter can be as small as 4mm. 3.Roller protruding design, no obstruction, unlimited length of engraved objects. 4.Compatible with ATOMSTACK, NEJE, Ortur,Twotrees,etc. and applicable to 95% of engraving machines on the market. 5.Concentric design, adjustment-free timing belt,and the motor is not exposed, safer. 6.Engraving: longer cylinders, small diameter cylinders, over-length plate engraving, over-length plate cutting. Specifications: Material: Aluminum Alloy,303 Stainless Steel, Iron, Silicone,Plastic Power: 24W Item Size: 260 * 90 * 100mm / 10.2 * 3.5 * 3.9in Item Weight: 1.04KG / 2.3lbs Package Size: 29 * 19 * 13cm / 11.4 * 7.5 * 5.1in Package Weight: 1.586KG / 3.5lbs Packing List: 1 * Roller Axis of Rotation 4 * Auxiliary Heightening Columns ATOMSTACK F1 Features: Applicable Equipment: CO2 laser engraving machine, diode laser engraving machine, fiber laser engraving machine. All-metal Structure & Measurement Design: all-metal structure, high-precision CNC processing, high flatness, strong structure, not easy to deform, not easy to shift. The X-axis and Y-axis are equipped with high-definition and precise scale lines to form a ruler, which is convenient for you to quickly measure the size of the engraving. Fast Heat Dissipation: The size of the honeycomb is scientifically calculated, which can make the carving object get fast heat dissipation during the carving process, and the cutting edge is more refined, while avoiding the burning of the carving object due to excessive temperature. Protection for Laser Module: In the laser cutting operation, the ATOMSTACK honeycomb board is used to prevent the laser reflection from damaging the laser head during the cutting process and prolong the service life of the laser. Double Protection: ATOMSTACK honeycomb board adopts scientific and reasonable honeycomb height size design to prevent laser burning workbench or desktop. At the same time, it is equipped with anti-cutting metal protective backing board, which can further protect the desktop from laser damage. Anti-skid Metal Fixture Fixation: fixture design, suitable for fixing various sizes of carvings, preventing the objects from shifting to the exact position during the carving process, and preventing the carvings from deforming. Specification: Model: F1 Material: High-strength Steel Product Size: 380 x 284 x 22mm Product Net Weight: 1.9KG Cutting Pad: SUS304,390*300*0.5mm Package Weight: 2.1KG/4.6lbs Package Size: 420 x 335 x 50mm/16.5 x 13.1 x 2in Packing List: Honeycomb Board x 1 Bolt x 4 Nut x 4 Magnetic Nail x 4 Honeycomb Board Briquetting x 4 Cutting Pad x 1 Manual x 1 Air assist kit Features: Suitable for ATOMSTACK laser engraver such as A5 10W, A5 20W, A5 30W, A5 Pro, A5 Pro+, Atomstack Pro+, A5 M40, A5 M50, A5 M50 Pro, X7, X7 Pro, S10 Pro, A10 PRO, P7 M40, P9 M40, P9 M50. Equipped with 10-30L/min adjustable airflow, can effectively remove the smoke and dust generated in the process of laser cutting/engraving, prevent the smoke and dust from causing laser energy attenuation, ensure the stability of laser energy, and make your engraving / engraving Cut pieces for best results. ATOMSTACK air-assisted accessories, powerful airflow can quickly reduce the surface temperature of the cutting/engraving object, prevent excessive burning, and make the cutting edge cleaner and smoother. Only 60dB noise is generated during the working process, which is similar to the volume of household electric fans when working, giving you a quiet laser engraving and cutting environment. Easy to install and use, no need to buy additional accessories, just two steps to install and use. Specification: For: ATOMSTACK A5 10W, A5 20W, A5 30W, A5 Pro, A5 Pro+, Atomstack Pro+, A5 M40, A5 M50, A5 M50 Pro, X7, X7 Pro, S10 Pro, A10 PRO, P7 M40, P9 M40, P9 M50. Parameter: 10-30L/Min (Adjustable airflow speed) Noise decibel: 60dB Package weight: 1KG/2.2lbs Packing List: Fixing Screw * 4 Fixed Cable Tie * 4 Hexagon Wrench * 1 Air Pump For Laser Work * 1 2 Meters Of Air Pipe * 1 Dedicated Replacement Filter Acrylic Set * 1 Modified Wind Hood * 2 ATOMSTACK R3 PRO Features: Upgraded Roller: With a support frame, the R3 PRO roller adds a support post to sculpt irregular prototype bodies such as goblet,baseball bat. The diameter can be adjusted in 8 steps, and the engraving diameter can be as small as 4mm. No installation, no adjustment, ready to use after unpacking. The roller made of One-piece rubber, hardness up to 70A and with strong friction, and when carving can fix the object, and is not limited by the length of the object. Concentric design, adjustment-free synchronising belt,and the motor is not exposed, safer. Compatible with ATOMSTACK, NEJE, Ortur,Twotrees,etc. and applicable to 95% of engraving machines on the market. Specification: Model: R3 PRO Power: 24W Dimensions: 260x90x100mm Material: Aluminum alloy, 303 stainless steel, iron, silicone,plastic Applicable models: Compatible with 95% of laser engraving machines on the market. Including ATOMSTACK, Ortur, NEJE, Twotresss, etc. Package Size: 28.5 x 18 x 14cm/11.2 x 7 x 5.5in Pacakge Weight: 2.05kg/4.5lb Packing List: 1 x Roller Axis of Rotation 4 x Auxiliary Heightening Columns 2 x Auxiliary Support Shaft 1 x Support Frame Extension Kit Features: Applicable models: ATOMSTACK A10 Pro / X7 Pro/ S10 Pro/A5 M50/ A5 M50 Pro laser engraver. Quick to assemble: just replace the frame shaft of the ATOMSTACK series engraving machine, you can get a large engraving area of 850*410, without purchasing any additional accessories to meet your large-area engraving needs. High-precision profiles of the same color: the expansion kit adopts the metal profiles of the same color as the A5 10W/ A5 20W/ A5 30W/ A5 M30/ A5 M40/ A5 Pro/ A5 Pro+ engraving machines, which expands the engraving area and ensures the stability and accuracy of the engraving machine. What you get: 2pcs Y-Axis Extension Axis, 1pcs 2.8m rubber belt, 1pc extension cord and a manual. Any problem, please contact our store without hesitation. Honor to serve you. Specification: Brand: ATOMSTACK Suitable for: A10 Pro / X7 Pro/ S10 Pro/A5 M50/ A5 M50 Pro Laser Engraver Y-Axis Extension Shaft Size: 1050mm Engraving Enlargement Size: 410*850mm Product Net Weight: 1.21kg Single Package Weight: 1.95kg/4.3lb Packing Size: 111.5x6.5x5.7cm/43.8x2.5x2.2in Packing List: 2 * Y-Axis Extension Axis 1 * Extension Cord 1 * Rubber Belt 1 * Manual M50 Engraving Module Features: ▶ It can be used for laser cutting machine, laser engraving machine, CNC, DIY laser, suitable for ATOMSTACK laser engraver model A5 20W,A5 M30,A5 M40,A5 PRO,A5 PRO+,A5 M50,A5 M50PRO,A10,A10 PRO,X7 PRO,S10 PRO,P7 M30,P7 M40, P9 M40, P9 M50. Upgraded high quality fixed-focus laser, no need to focus. ▶ Engravable Materials - Wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective electroplating layer and lacquered metal, after blackening Utility knife. Cutable Material - Cardboard, non-woven fabric, veneer, acrylic, some thin plastic board. ▶ Laser protective cover - The laser is equipped with a protective cover to protect the eyes of the user without the need to wear additional protective glasses. At the same time, prevent pets from grabbing the laser spot. ▶ M50 engraving laser module made of aluminum, strong and durable. Aviation aluminum TTL driver board with cooling fan can ensure continuous long time work. ▶ 0.08x0.06mm double compression spot light coupling technology makes engraving more powerful and precise. 11000mm/min engraving speed is 200% higher than other 5W lasers. Specification: Model: M50 For: ATOMSTACK Laser Engraver Model A5 20W,A5 M30,A5 M40,A5 PRO,A5 PRO+,A5 M50,A5 M50PRO,A10,A10 PRO,X7 PRO,S10 PRO,P7 M30,P7 M40, P9 M40, P9 M50 Material: Aluminum 6061 Anode Spot Size: 0.08 x 0.06mm Cutting Wood: 15mm Laser Wave Length: 450nm Cutting Speed: Increased by 40% Optical Output Power: 9.5-10W Engraving Speed: 11000mm/min Cutting Speed: 80mm/min Cutting Depth: 15mm Optical Lens: φ6/ Fan: 12V Circuit Board: 12V/PWM Modulation Board Circuit Board Size: 44 x 52mm Wire Rod:22# 2P2.54 Terminal Reverse Wire 80mm Working Time: 10000H Working Temperature: 0℃~70℃ Storage Temperature: 一40℃~85℃ Sintering Temperature: 1100~1200℃ Housing Size: 44 x 52 x 50mm Size: 118 x 52 x 44mm/4.6 x 2 x 1.7in Weight: 260g/9.1oz Package Size: 26.5 x 19.5 x 7cm/10.4 x 7.7 x 2.8in Package Weight: 900g/31.7oz Packing List: 1 x Laser Host 1 x Plate 1 x PCB Circuit Board 1 x Fixed Focus Plate 1 x Connect Line 1 x Wrench and Screws Kit

• 
• 
• 
• 

Recenzja